October 8, 2026 Kath Nguyen

Redshift Environment Fog and Volumetric Light in Cinema 4D: Scattering, Height Fog and Noise

AtmosphereScene-wide fog with the Redshift Environment
From Maxon documentation

The Redshift Environment object adds fog and light beams to the whole scene. Check these before a fog render:

  • Create: add a Redshift Environment from the Create menu; it applies to the whole scene
  • Scattering: sets how bright the beams are; lower it if the frame washes out white
  • Viewing Distance: sets how thick the fog is; infinite lights such as the sun are not dimmed by it
  • Height: 0 fills the scene; a value makes ground fog
  • Lights: each light needs a Volume contribution above 0 to make beams

Light beams through a dusty warehouse, haze in a product shot or low morning fog over a landscape all come from the same idea: the air is not empty. Redshift renders that participating medium for the whole scene with the Redshift Environment object, without modeling a volume or loading a VDB.

This guide explains what each fog setting controls, how to set up scene-wide fog step by step, how anisotropy decides where the glow shows, how height fog works, and how to keep fog renders clean and affordable. For fog and smoke stored in VDB files, see our guide to Redshift volumes and OpenVDB in Cinema 4D.

Checked against the Maxon documentation for the Redshift Environment (Volume Scattering), Volumetric Scattering and Fog, and Common Redshift Light Parameters (Cinema 4D 2026), November 2026.

1. What does the Redshift Environment do?

The Redshift Environment object fills the scene with a global medium that scatters light. You create it from the Create menu and switch it on with the green check next to it in the Object Manager (Maxon: Volumetric Scattering and Fog). Lights that pass through it become visible as beams, and objects in their path cast dark shafts.

iRender
What Each Redshift Environment Fog Setting Controls
Schematic
Height: fog stops herelight: Volume Contribution Scale > 0object casts a dark shaftcamera123451Scattering (1/m)how bright the beams are2Viewing Distance (m)how thick the fog is and how muchlight dims passing through it3Anisotropy-1 back · 0 even · +1 toward the light4Emissionself-lit fog color (default black)5Height0 = whole scene; above 0 = ground fog
light beamheight fog
Schematic · from Maxon Redshift Environment documentation

The figure maps the main settings to what you see. Maxon describes them this way (Maxon: Redshift Environment, Volume Scattering):

  • Scattering (1/m): the strength of the volumetric lighting. Higher values are brighter; if the frame turns washed-out white, reduce it a lot.
  • Viewing Distance (m): how thick the fog is and how much light dims as it passes through. It is especially useful with Emission to make ground fog visible.
  • Anisotropy: from -1 to 1, the direction light prefers to scatter (section 3).
  • Emission: makes the fog glow by itself, so it can have color instead of staying black; black by default.
  • Tint: a global tint for volumetric lighting, which does not include the global fog.

One rule surprises people: Viewing Distance only dims non-infinite lights. Dome lights, the physical sun and infinite lights are not attenuated, because their infinite distance would otherwise be blocked completely.

2. How to set up scene-wide fog in Redshift (step by step)

Settings checklist (copy or follow line by line):

Settings checklist
Create › Environment › Redshift Environment
Enable → green check in the Object Manager
Redshift Environment › Volume Scattering
Scattering (1/m) → start very low; lower it if the frame washes out white
Viewing Distance (m) → thickness of the fog and how much light dims
Anisotropy → 0 even · above 0 toward the light · below 0 back toward the camera
Emission → black by default; color for self-lit fog
Camera Exposure Compensation → On (Maxon recommends leaving it on)
Height → 0 = whole scene; a value = ground fog; Horizon Blur for large scenes
Ray Contribution › GI → Off (default) // washes out, adds noise and cost
Each Redshift light › Details / Volume
Volume Contribution Scale → above 0 for lights that should make beams
Volume Samples → raise only if the beams stay noisy
Check → the frame with the strongest beams, at final samples

Step 1: Add the Redshift Environment

Create a Redshift Environment from the Create menu and make sure its green check is on.

Step 2: Start with very low Scattering

Raise Scattering slowly while you watch a light beam in the RenderView. If the whole frame goes white, the value is far too high.

Step 3: Set the thickness

Use Viewing Distance to make the fog thicker and to dim lights that travel through it. Add a dark Emission color if the fog should glow faintly on its own.

Step 4: Turn on volume light per light

Each Redshift light has a Volume Contribution Scale; it scales the light’s effect on volume materials and environment fog, and 0 disables it (Maxon: Common Redshift Light Parameters). Keep it above 0 only on the lights that should make beams.

Step 5: Check noise

Render the frame with the strongest beams at final samples. If the beams are grainy, raise the light’s Volume Samples, which Maxon notes reduces noise at a cost in performance (Maxon: Light Parameters, Volume Samples).

3. Anisotropy: why the glow shows from one side

Anisotropy controls the direction in which the medium scatters light. At 0 the scattering is even. Positive values scatter forward, so the glow is strongest when the camera looks toward the light; negative values scatter backward, so it is strongest when the light travels away from the camera. Seen from the side, the effect is weaker either way (Maxon: Redshift Environment).

iRender
Anisotropy: Where the Fog Glow Is Visible
Schematic
Camera looks toward the lightpositive Anisotropy (forward scattering) shows stronglylightcameralight keeps going forward, into the lensLight behind the cameranegative Anisotropy (backward scattering) shows stronglylightcameralight bounces back toward the cameraSeen from the side, either setting looks weaker; Anisotropy 0 scatters evenly in all directions
scattered lightfog
Schematic · from Maxon Redshift Environment documentation

That is why a shot can look right in one camera and flat in another. If a sun-through-the-window shot loses its beams when the camera turns, check the anisotropy before you raise Scattering, which brightens the whole frame instead of the beams.

4. Ground fog and horizon lines

A Height of 0 fills the scene with fog. Any other value limits the fog to that height, which gives low ground fog. In large scenes the height fog can meet the horizon in a hard line; Horizon Blur fades the fog there to soften it (Maxon: Redshift Environment).

By default the fog follows the Redshift Environment object (Use Transform). With it off, Ground Point and Ground Normal place the fog plane; setting the normal along X or Z turns the height fog sideways, which Maxon notes can create vertical fog. Ground fog stays dark without light passing through it, so Maxon suggests pairing Viewing Distance with Emission to make it read.

5. Keeping fog renders clean and affordable

Fog adds work to every ray that crosses the medium, so the settings that limit where it applies also limit the cost:

  • GI contribution: the environment’s GI ray contribution is off by default; Maxon notes it can wash out the result, add noise (especially with strong anisotropy) and increase render cost.
  • Lights: keep Volume Contribution Scale at 0 on lights that do not need beams.
  • Samples: raise Volume Samples on the beam lights before raising global samples; see our Redshift sampling guide for the order.
  • Compositing: Replace Alpha sets the environment alpha to 1 so the fog does not disappear where alpha is partial; turn it off only if you will composite the fog separately.
TroubleshootSymptom to setting

When the fog looks wrong

Based on Maxon Redshift Environment and light docs

SymptomLikely causeFix
Whole frame washed out whiteScattering far too highLower Scattering a lot, then raise slowly
No beams from a lightLight Volume Contribution Scale at 0Raise it on that light
Sun shows no fog dimmingInfinite lights are not attenuated by Viewing DistanceExpected; use Scattering, Emission or a local light for depth
Beams vanish when the camera turnsAnisotropy favors one viewing directionLower the absolute Anisotropy value
Grainy beamsToo few volume samples on the lightRaise that light’s Volume Samples
Hard line where ground fog meets the skyHeight fog in a large sceneRaise Horizon Blur
Fog missing in partly transparent areas of the alphaReplace Alpha offTurn Replace Alpha on unless the fog is composited separately

Test on the frame where the beams are brightest and the camera looks into the light; that is where fog noise shows first.

6. SaaS or IaaS render farm for fog-heavy shots?

CompareNeutral guide

Which farm type fits a fog shot

Both farm types render Redshift environment fog; the difference is how you tune density and noise.

SituationUsually a better fitWhy
Fog settings final, frames onlySaaSUpload and collect frames without managing a machine
Scattering, anisotropy and samples still being tunedIaaSYou adjust and re-render the hero frame on the render machine itself
Heavy beams that need many volume samplesEitherBoth benefit from more GPUs; check cost per frame on a test frame
Studio pipeline with its own submit toolsEitherPick the farm that supports your submit workflow

Rule of thumb: fog is easy to over- or under-tune, so settle density and samples on a machine you can open, then render the final range where it suits you.

Rendering a fog shot on an iRender server

iRender
How iRender works: your computer controls your own multi-GPU server
IaaS render farm
Your PC or MacNo powerful GPU neededRemote desktopLive screen1:1 like your PCYOUR OWN GPU SERVERbare-metal · not sharedGPUGPUGPUGPUGPUGPUGPUGPU1, 2, 4 or 8 × RTX 5090 (32 GB) or RTX 4090 (24 GB)Threadripper PRO · 256 GB ECC RAM · 2 TB NVMe SSDFull admin access · your setup is saved between sessions1Register, top upFirst $50+ top-up doubled2Upload your projectiRender Drive, free3Start and connectRemote desktop, any OS4Render, shut downBilling stops, per minute✓ Your workstation, just more GPUs: no queue to wait, no farm plugin, no job submission, no settings changed
Your mouse and keyboardServer screen streamed back
Schematic, not to scale

On iRender you work on the render machine by remote desktop, so fog density and noise are judged on the same GPUs that render the frames:

  1. Upload the project to iRender Drive before you start a server; uploading is free and does not use rental time.
  2. Start a server with RTX 5090 (32 GB) or RTX 4090 (24 GB) GPUs. Cinema 4D and Redshift are pre-installed.
  3. Render the frame with the strongest beams at final samples and adjust Scattering, Anisotropy and Volume Samples.
  4. Render the full range from the Picture Viewer or Render Queue, then shut down. Multi-GPU servers bill per minute; 1-GPU servers have a one-hour minimum.

Redshift environment fog checklist

Tick each item before you send the full range to any machine.

ChecklistRedshift environment fog checklist
0 / 10 done
Tip: tick each item as you set up the job; the ticks reset when the page reloads.

Frequently asked questions

1. How do I add fog to a whole scene in Redshift?

Create a Redshift Environment object from the Create menu and enable it. Raise Scattering slowly for visible light beams and use Viewing Distance for fog thickness.

2. Why is my render completely white after adding fog?

Scattering is too high. Maxon advises reducing it significantly if the frame becomes washed out; start with a very small value and raise it gradually.

3. Why does the sun not get dimmer through the fog?

Viewing Distance only attenuates non-infinite lights. Dome lights, the physical sun and infinite lights are not attenuated, because their infinite distance would otherwise be fully blocked.

4. Why do my light beams disappear when the camera moves?

Anisotropy makes the medium scatter mostly forward or backward, so the glow depends on the viewing angle. Lower the absolute Anisotropy value for a more even look from all sides.

5. How do I make low ground fog?

Set Height above 0 so the fog stops at that height, add Viewing Distance with a little Emission so it reads, and use Horizon Blur if a hard line appears at the horizon.

6. Why are my volumetric beams noisy?

Each light has its own Volume Samples. Raise them on the lights that make the beams; Maxon notes more samples reduce noise at a cost in performance.

7. Should fog affect GI?

The GI ray contribution of the Redshift Environment is off by default. Maxon notes enabling it can wash out results, add noise and increase render cost, so turn it on only when the shot needs it.

8. Can I render fog shots on a multi-GPU iRender server?

Yes. Cinema 4D and Redshift are pre-installed on iRender servers with 1, 2, 4 or 8 RTX 5090 or RTX 4090 GPUs, and you can tune fog density and samples on the same machine before rendering the range.

Render your Cinema 4D and Redshift projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. Your server image is saved between sessions, so your plugins and settings stay installed. Cinema 4D and Redshift are pre-installed on every server.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Cinema 4D and Redshift on it:

Two Redshift runs we recorded on our servers: 150 frames at 1080p on 4x RTX 5090 at 40.84 seconds per frame (about 1h 42m), and a 301-frame cloth simulation at 1080p on 1x RTX 5090 at 21.3 seconds per frame:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Cinema 4D and Redshift render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , ,

Kath Nguyen

Kath Nguyen works in customer support at iRender, helping artists move Blender and Cinema 4D projects to multi-GPU servers. She has written more than 140 articles for the iRender blog.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →