November 2, 2026 Linh Nguyen

Blender Cycles Caustics and Subsurface Scattering (2026): Shadow Caustics, Random Walk and Render Time

Quick answerCaustics and SSS in Cycles
Checked Nov 2026

For glass and water, Cycles has shadow caustics (MNEE, added in Blender 3.2): enable Shadow Caustics on the light, Cast Shadow Caustics on the refractive object and Receive Shadow Caustics on the surface, and Cycles renders sharp refractive caustics inside shadows only. For skin, wax and marble, Blender 5.0 made Random Walk subsurface scattering multi-bounce, which reduces dark artifacts at some render-time cost.

  • Caustics: light + caster + receiver must all be enabled.
  • Limits: refractive only, smooth normals on the caster.
  • SSS: 5.0 Random Walk is multi-bounce.
  • Cost: test the heaviest close-up on the target GPUs.

Caustics and subsurface scattering are two of the slowest effects to converge in a path tracer, and both are common in product, food and character work. Cycles offers targeted tools for each.

This guide covers shadow caustics and their limits, the Light Paths caustics settings, what changed for Random Walk SSS in Blender 5.0, and how to budget render time for shots that use them.

Checked against the Blender 3.2 and 5.0 Cycles release notes, the Cycles MNEE commit and the Blender Manual (Object Settings, Light Paths, Subsurface Scattering), November 2026.

1. Shadow caustics with MNEE

Blender 3.2 added shadow caustics based on manifold next event estimation (MNEE) (Blender 3.2: Cycles). The developer commit explains the idea: enable caustics selectively on a few objects where they have a big visual impact, without slowing the rest of the scene. The Shadow Caustics option must be enabled on the light, the receiver and the caster, and on those light paths Filter Glossy is ignored in favour of sharp caustics (Cycles MNEE commit).

iRender
Shadow caustics (MNEE) in Cycles
Schematic
LightShadow Caustics onGlass objectCast Shadow CausticsFloor: Receive Shadow Causticscaustic inside the shadowAll three must be enabled:light, caster and receiverShadow caustics need the light, the caster and the receiver all enabledCycles MNEE commit; Blender 3.2 release notes
lightcasterreceiver
Source: Blender 3.2 release notes; Cycles MNEE commit

2. Limits worth knowing

MNEE only produces caustics in the shadows of refractive objects, not reflective ones. The Manual lists further limits: caustic rays can pass through only a limited number of caster surfaces, caster objects need smooth normals, the Ambient Occlusion node does not give a valid result on casters or receivers, and volumes are not considered (Blender Manual: Object Settings). If a shot needs reflective caustics or caustics outside shadows, enable the general caustics options in Light Paths and expect more samples.

iRender
Where Cycles shadow caustics work
Schematic
✓ Refractive glasscaustic inside its shadow✕ Mirrorreflective: not handled✕ Flat normalscaster needs smooth normals✕ Outside the shadowMNEE works in shadows onlyFor reflective caustics or caustics outside shadows, use the general caustics options in Light PathsCycles MNEE commit; Blender Manual: Object Settings (Caustics)
supportednot supported by MNEElight
Schematic, not to scale

Only the first case is what shadow caustics are built for. The other three need either a change to the model, such as smooth shading on the caster, or the general caustics settings described next. The table sums up the settings and their cost.

ChoicesBlender 5.x + Cycles

Caustics and SSS settings and their cost

Where each setting lives and what it changes.

SettingWhereEffect
Shadow CausticsLight, and Object › Shading › CausticsApproximate refractive caustics in shadows via MNEE; only where enabled
Filter GlossyRender › Light Paths › CausticsBlurs glossy bounces to reduce noise; ignored on MNEE paths
Reflective / Refractive CausticsRender › Light Paths › CausticsTurn general caustic paths on or off for the whole scene
Random Walk SSSPrincipled BSDF or Subsurface Scattering nodeMulti-bounce in Blender 5.0: fewer dark artifacts, some extra render time
SSS Radius and ScaleMaterialLarger scattering distances generally take longer to converge
RuleEnable shadow caustics only on the few objects where they show; leave general caustics off unless the shot needs them.

3. Light Paths: general caustics

Render › Light Paths › Caustics has Filter Glossy, which blurs glossy reflections after blurry bounces to reduce noise, and toggles for Reflective and Refractive caustics (Blender Manual: Light Paths). Turning caustics off removes much of the noise in glass-heavy scenes; turn them on only for the shots where viewers will notice them.

iRender
Caustic light paths: floor → glass or mirror → light
Schematic
diffuse floorcameralightglassmirrorrefractive caustic pathreflective caustic pathThese paths are hard to sample; turn the matching caustics toggle off when the shot does not need themBlender Manual: Light Paths (Caustics)
camera rayrefractive causticreflective caustic
Schematic, not to scale

Both paths start on a diffuse surface and reach the light only through a sharp glass or mirror bounce, which random sampling rarely finds. That is why caustics are noisy, and why switching off the type a shot does not need removes much of the noise.

For the same problem in Redshift for Cinema 4D, including sparkles on the glass itself, see Redshift caustics: how to stop flickering in animations.

4. Random Walk SSS in Blender 5.0

The Blender 5.0 release notes describe a more accurate random walk subsurface scattering with multiple bounces, reducing darkening artifacts at the cost of some render time (Blender 5.0: Cycles). Existing scenes using Random Walk pick this up when opened in 5.0, so re-check render time on character close-ups after upgrading, and keep every frame of a shot on the same Blender version. SSS parameters are described on the Subsurface Scattering manual page.

Both effects add samples rather than memory, so they scale well across GPUs; split frames as in multi-GPU rendering in Cycles and denoise consistently, see denoising Cycles animation.

iRender
Random walk subsurface scattering
Schematic
surface (skin, wax, marble)light entersexits elsewhererandom walk: the path scatters inside the material before leavingBlender 5.0multiple bouncesfewer dark artifactssome extra render timeEvery step of the walk is traced, so SSS adds render time compared with an opaque surfaceBlender 5.0 release notes: Cycles (Subsurface Scattering)
light in and outrandom walk path
Schematic, not to scale

Light that enters skin or wax leaves at a different point, which gives the soft, glowing look; tracing that walk is also where the extra render time goes.

A caustics and SSS checklist

  1. Caustics: Shadow Caustics on the light, caster and receiver only where needed
  2. Caster: smooth normals; no AO node on casters or receivers
  3. Light Paths: general caustics off unless the shot needs them
  4. SSS: close-up re-checked after moving to Blender 5.0
  5. Version: same Blender version for every frame of the shot
  6. Test: heaviest close-up rendered on the target GPUs

For paths, caches and other scene checks, see our 10-point Blender Cycles pre-flight checklist.

Both farm models render caustics and SSS. On an IaaS server you can try caustics on and off and compare SSS close-ups on the GPUs that will render the sequence, then pick the settings before the full run.

Rendering caustics and SSS on an iRender server

iRender
How iRender works: your computer controls your own multi-GPU server
IaaS render farm
Your PC or MacNo powerful GPU neededRemote desktopLive screen1:1 like your PCYOUR OWN GPU SERVERbare-metal · not sharedGPUGPUGPUGPUGPUGPUGPUGPU1, 2, 4 or 8 × RTX 5090 (32 GB) or RTX 4090 (24 GB)Threadripper PRO · 256 GB ECC RAM · 2 TB NVMe SSDFull admin access · your setup is saved between sessions1Register, top upFirst $50+ top-up doubled2Upload your projectiRender Drive, free3Start and connectRemote desktop, any OS4Render, shut downBilling stops, per minute✓ Your workstation, just more GPUs: no queue to wait, no farm plugin, no job submission, no settings changed
Your mouse and keyboardServer screen streamed back
Schematic, not to scale
  1. Upload the project folder to iRender Drive before you start the server; uploading is free and does not use rental time.
  2. Start a server with RTX 5090 (32 GB) or RTX 4090 (24 GB) GPUs and connect by remote desktop.
  3. Render the heaviest close-up, compare caustics and SSS settings.
  4. Render the sequence one Blender per GPU, then shut down; multi-GPU servers are billed per minute.

Frequently asked questions

1. How do I render caustics in Blender Cycles?

For refractive caustics in shadows, enable Shadow Caustics on the light, Cast Shadow Caustics on the glass and Receive Shadow Caustics on the surface. For other caustics, enable Reflective or Refractive caustics in Light Paths.

2. Why are my shadow caustics not showing?

All three settings (light, caster, receiver) must be enabled, the caster must be refractive with smooth normals, and the caustic must fall in a shadow.

3. Does MNEE work with reflective objects?

No. Cycles shadow caustics handle caustics in shadows of refractive objects only.

4. What changed for subsurface scattering in Blender 5.0?

Random Walk SSS became multi-bounce, which reduces darkening artifacts at the cost of some render time.

5. Do caustics and SSS use more GPU memory?

Mainly they need more samples and time; memory is driven more by geometry and textures.

Render your Blender projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. You install Blender once; your server image is saved between sessions, so Blender and your add-ons stay installed.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Blender on it:

Two Blender runs we recorded on our servers: 120 frames at 1080p on 4x RTX 5090 at 72 seconds per frame, and the same 4K scene on 4x RTX 5090 and 4x RTX 4090 at 87 and 108 seconds per frame per GPU:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Blender render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
,

Linh Nguyen

Linh Nguyen works in customer support at iRender, helping artists render Blender and Houdini projects on multi-GPU servers. She has written more than 300 articles for the iRender blog, covering Blender, Houdini and practical GPU rendering.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →