November 6, 2026 Linh Nguyen

Rhombic Spirallohedron in Cinema 4D Scene Nodes: Build and Tile It (2026)

Executive SummaryExecutive Summary: rhombic spirallohedron
Cinema 4D 2025+

A spirallohedron, a twisted solid that can pack space without gaps, can be built in Cinema 4D Scene Nodes from one helix that is rotated k times around the Y axis and lofted, then distributed on a grid to test the tiling.

  • Helix: a Line node on the Y axis (30 points); θ from the point index times 2π and a U parameter; x, y, z from R and H with Trigonometry and Arithmetic nodes.
  • Arms: Transform Geometry rotates the helix by 2π / k-side; Loft Line connects the two into a ribbon.
  • Solid: a Loop-Carried Value with a Range set by k-side repeats the rotation and joins the ribbons.
  • Tiling: Distribution Op at Vertex and at Polygon Center places copies on a plane grid for k = 4; another pair stacks them in 3D.
  • Animate: keyframe the U parameter to watch the spiral grow while the tiling holds.

Russell Towle (1949–2008) found a family of solids built from rhombic faces that he called k-armed rhombic spirallohedra. They twist around an axis like a drill bit, yet the 3- and 4-armed versions close-pack to fill space. This tutorial recreates one in Cinema 4D Scene Nodes and then tests the space-filling property on grids.

The video points to further reading in papers by Michel Petitjean and George Hart, to Towle’s own videos, and to a Houdini version by Junichiro Horikawa. This guide follows the video chapter by chapter.

Checked against the Maxon Cinema 4D help pages for Scene Nodes, Russell Towle’s Wolfram Library entry and Frans Snik’s paper, November 2026.

The full tutorial runs 16:13. Chapters: 1:05 base spiral, 6:03 base shape, 10:00 square grid distribution and space filling, 14:43 triangle and hexagon grids, 15:33 wrap-up.

What a spirallohedron is

Towle described the rhombic spirallohedra as solids with k-fold rotational symmetry around one axis but no central symmetry, and noted that the 3- and 4-armed versions close-pack to fill space even though they can have thousands of faces. Frans Snik later described related spiralling space-fillers based on triangle, square and triangle-plus-hexagon tilings, and identified them as limiting cases of Towle’s spirallohedra.

The build in Cinema 4D follows the same logic: one helix, copied around the axis k times, with surfaces lofted between neighbouring copies.

iRender
From one helix to a 3-armed spirallohedron
Schematic
Y axis1. A helix from a Line node: point index → θ → x, y, z2. Rotated by 2π/k and lofted, k = 3 (white: base helix)
ribbon between arm 1 and 2arm 2 to 3arm 3 to 1
Computed in 3D and projected; illustrates the build, not Petitjean's exact formula

How to read the figure. It is computed in 3D and projected. On the left, each of the 30 points gets an angle θ from its index, and θ sets its x and z while the index sets its height. On the right, the helix is copied three times at 120° steps and ribbons are lofted between neighbours. The exact helix formula the video uses comes from Petitjean’s paper; the figure only shows the idea.

1. Build the base spiral

  1. Create a Node Mesh and name it Spirallohedron.
  2. Add a Line node with the axis set to Y and a parameter for the point count, default 30.
  3. Build θ: use Geometry Property Get and Iterate Collection to get the count and index, take index divided by count, and multiply by a parameter set to 2π. Multiply by a U parameter as well, for animation later.
  4. Create parameters for the radius R and height H, and use Trigonometry and Arithmetic nodes to compute x, y and z. In Cinema 4D the height axis is Y.
  5. Combine them with Compose Vector 3D and write the positions back with Geometry Property Set.
  6. If you see an error, the U parameter is still 0; set it to 1.

2. Build the base shape

  1. Add a Transform Geometry node and a k-side parameter, default 3.
  2. Rotate the helix around the Y axis by 2π / k-side.
  3. Connect the original and the rotated helix with a Loft Line node to make a ribbon. The point count and k-side now control the U and V divisions of the mesh.
  4. Add a Loop-Carried Value with a Range node driven by k-side. Inside the loop, keep rotating by 2π / k-side and connect the results.

With k-side at 3 you get a clean 3-armed spirallohedron. Change k-side to see how the solid changes.

iRender
The k-side parameter changes the solid
Schematic
k = 3: tiles on a triangular gridk = 4: tiles on a square gridk = 6: hexagonal grid in the video
arm 1arm 2arm 3arm 4
Computed with the same helix and loft as the figure above

How to read the figure. The three solids use the same helix and loft with k set to 3, 4 and 6. More arms make each ribbon narrower and the solid rounder.

iRender
Steps 1 and 2 as node chains
Schematic
LineAxis YPoints 30GeometryGet + IterateGeometryIndexCountθ = i / n × 2π × UIndexCountU = 1θTrig + ArithmeticθRHxyzCompose → SetxyzHelixHelixGeometryTransform GeometryGeometryRot Y = 2π / kRotatedLoft LineLine ALine BRibbonLoop-Carried ValueRibbonRange = k-sideSolidOutputSolid1Step 1: one helix from a Line node2Step 2: rotate, loft, repeat k timesIf the graph errors right away, U is still 0: set it to 1.
the mathsoutput
Simplified; helper nodes left out

How to read the figure. The top chain is step 1: every point of the Line gets its own angle from its index, and that angle, together with R and H, places it on the helix. The bottom chain is step 2: copy the helix, rotate it by 2π divided by k, loft the two into a ribbon, and let the Loop-Carried Value repeat that k times around the axis. Change k-side and the number of arms follows.

3. Test space filling on a square grid

Set k-side to 4 to test the tiling on a square grid.

  1. Create a Plane node and drive its length, width and segments from the existing R and k-side parameters.
  2. Use a Distribution Op set to Vertex with a Transform Geometry node to place a spirallohedron on every grid point.
  3. Add a second Distribution Op set to Polygon Center, with its own Transform Geometry, to fill the gaps between grid points.
  4. To explore it in 3D, add another Distribution Op and Transform Geometry pair to stack the layers.
  5. Keyframe the U parameter to animate the spiral and watch the packed structure evolve.

4. Triangle and hexagon grids

For k = 3 and k = 6, the video builds regular triangular and hexagonal grids and repeats the test. In the video the shapes fit together on both grids. Towle’s own notes state the close-packing result for 3 and 4 arms, and Snik’s paper covers bodies based on triangles, squares and the triangle-hexagon combination, so treat the k = 6 case as the video’s demonstration rather than a quoted theorem.

Render the animation on several GPUs

Procedural setups are evaluated before each frame renders, so time a test frame first and cache anything that simulates over time. After that, Redshift can render each frame on every GPU in the machine. Each card holds its own copy of the scene, so plan VRAM per card, not in total (Maxon support). A scene that fits on one RTX 4090 (24 GB) or RTX 5090 (32 GB) fits on each card of a 4x or 8x server.

Spirallohedron checklist

Check these points before you animate and render.

ChecklistSpirallohedron checklist
0 / 9 done
Tip: Tick the items as you check the scene. The ticks reset when you reload the page.

SaaS or IaaS render farm for procedural Cinema 4D setups?

A Scene Nodes or particle setup is stored in the .c4d file, so any farm with a compatible Cinema 4D version renders it the same way. The differences are version matching, how heavy the evaluation is before each frame renders, and how fast you can fix a setup that behaves differently at render time.

Farm modelFor this task

SaaS or IaaS for procedural scenes

How each farm model fits a procedural Cinema 4D scene built with nodes, fields or simulations.

Your situationSaaS render farmIaaS render farm (iRender)
The scene is final and the farm supports your exact Cinema 4D versionA good fit: upload the scene, the farm renders the framesWorks too; you open the scene and render it yourself
The setup depends on a recent Cinema 4D releaseCheck that the farm runs the same release, since node assets can change between versionsInstall or update to the release you used, so the setup evaluates the same way
A frame looks different from your viewportFix it locally, upload again and resubmitOpen the scene on the server and fix it where it renders
You have a deadline and need to know when rendering starts and endsJobs join the farm’s queue, so the start time depends on how busy the farm is; many farms sell higher-priority plans to start soonerThe server runs only your job from the moment it boots, so you control when rendering starts and can time the whole job
Note: A comparison of how the two farm models work for this task, not a speed test.

Simple rule: if the scene is final and the farm runs your Cinema 4D version, a SaaS farm saves you the machine work. If you need a specific release, or want to check the setup where it renders, a server you control is the safer choice.

A test workflow on an iRender server

iRender
Works 1:1 like your own PC: we keep your setup, you just get more GPUs
IaaS render farm
Your workstationscene.c4d · .blend · .hip1 GPUYour iRender serverscene.c4d · .blend · .hipup to 8 GPUs=same setupWindows or Ubuntu desktopYour software, in the version you chooseYour plugins and scriptsYour licensesYour scene and render settings, unchanged1 GPUGPU power: the only difference1, 2, 4 or 8 × RTX 5090 / 4090✓ Only the GPU count changes: open your scene and render the way you do at home
Same on both machinesTip: upload the full project folder with relative paths so textures are found
  1. Upload first. Put the .c4d file and its assets on iRender Drive before you start a server; transfer and storage are free.
  2. Match the version. Cinema 4D and Redshift are pre-installed; check the version and update it to the one you built the scene in if needed. Your server image keeps the change.
  3. Check the setup. Scrub the timeline and confirm the animation evaluates the same way as on your PC; cache any simulation.
  4. Render a test frame. Check the Redshift log for all GPUs and the detail at final resolution.
  5. Render the shot. Save frames to iRender Drive and shut the server down when the job is done; multi-GPU servers are billed per minute.

Frequently asked questions

1. What is a rhombic spirallohedron?

A solid made of rhombic faces with k-fold rotational symmetry around one axis, described by Russell Towle.

2. Can spirallohedra fill space?

Towle stated that the 3- and 4-armed rhombic spirallohedra close-pack to fill space.

3. How is the helix built in Scene Nodes?

A Line node on the Y axis gets an angle from each point’s index; Trigonometry and Arithmetic nodes turn that angle, the radius and the height into x, y and z.

4. What does the k-side parameter do?

It sets how many times the helix is rotated around the Y axis, which sets the number of arms.

5. Why does the setup error at first?

Because the U parameter is 0, which collapses the angle; setting it to 1 fixes it.

6. How is the tiling tested?

Distribution Op nodes place copies at the vertices and polygon centres of a grid plane, and another pair stacks them in 3D.

7. Can the spiral be animated?

Yes, by keyframing the U parameter.

Render your Cinema 4D and Redshift projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. Cinema 4D and Redshift are pre-installed, and your server image is saved between sessions.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

Two recorded Redshift runs on iRender servers:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Cinema 4D and Redshift render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , ,

Linh Nguyen

Linh Nguyen works in customer support at iRender, helping artists render Blender and Houdini projects on multi-GPU servers. She has written more than 300 articles for the iRender blog, covering Blender, Houdini and practical GPU rendering.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →