November 2, 2026 Vivian Vu

Octane Light Linking in Cinema 4D (2026): Light Pass IDs, Include/Exclude and Light AOVs

Executive SummaryKey Takeaways: Octane Light Linking and Light Passes
Cinema 4D • OctaneRender

Octane controls which lights reach which objects with Light Pass IDs: an ID on each light, and a light pass mask on each object. The same IDs also split the render into light passes you can rebalance in compositing.

  • IDs live on the lights. Octane Light Tag › Light settings tab › Light pass ID, values 1 to 8 in OTOY's Cinema 4D docs.
  • Masks live on the objects. Octane Object tag › Object layer tab › Use light pass mask: Enable, then tick or untick sun, environment and IDs.
  • Global switch. Live Viewer › Settings › Kernels › Light section: Lights ID Action Enable or Disable for the whole scene.
  • Light passes. Lights with the same ID go into the same light pass; passes behave as if the other lights were off and add back up to the render.
  • Default. If nothing is configured, all emitters contribute to light pass 1.

Light linking lets a key light hit only the product, keeps a fill light off the background, or removes one lamp from one object without touching the rest of the scene. This guide follows OTOY’s Octane for Cinema 4D documentation for light linking and lighting passes.

Checked against the OTOY documentation, November 2026.

1. How Octane light linking works

Octane does not link lights to objects by name. Each light gets a Light pass ID in its Octane Light Tag, and each object can carry a light pass mask in its Octane Object tag that says which IDs, plus the daylight sun and the environment, may light it (OTOY: Working with Light Linking). OTOY notes every object that uses this feature needs an Octane Object tag.

iRender
Lights carry IDs, objects carry masks
LIGHT LINKING
ID 2 maskedKey light · ID 2Fill light · ID 3Product: key + fillBackground: fill onlyProductOctane Object tag › Use light pass maskse1234all IDs tickedBackgroundOctane Object tag › Use light pass maskse1234ID 2 untickedUntick ID 2 on the background and the key light stops reaching it; every other object keeps both lights
Key (ID 2)Fill (ID 3)Mask on
From OTOY: Working with Light Linking (Cinema 4D)

2. How to set up light linking (step by step)

  1. Give each light an ID. Select the Octane Light Tag, open the Light settings tab and enter a value in Light pass ID at the bottom of the tab. OTOY’s example sets 2 on an orange light and 3 on a cyan light. Lights with the same ID behave as one group (OTOY: Octane Light Tag).
  2. Tag the object. Add an Octane Object tag to every object you want to control.
  3. Enable the mask. In the Octane Object tag, open the Object layer tab and set Use light pass mask to Enable.
  4. Untick what should not light the object. The mask has boxes for the daylight sun (s), the environment (e) and the light IDs. In OTOY’s example, unticking 2 on a dragon removes the orange light from it while the cyan light still reaches it.
  5. Check in the Live Viewer before rendering, from the angles you will actually render.

OTOY’s Cinema 4D page lists Light pass IDs 1 to 8. Newer Octane documentation for the standalone app describes twenty Light IDs, so check the range your Octane for Cinema 4D version shows before planning a large rig. If an object only needs to lose one or two lights, untick only those IDs and leave the rest ticked.

3. Per-object masks or the global Light IDs switch?

Octane has a second, scene-wide control in the kernel: Live Viewer › Settings › Kernels, Light section, Lights ID Action. Set to Disable, the ticked IDs are switched off for the whole scene; set to Enable, only the ticked IDs light the scene. It also covers the daylight sun and the HDRI environment (OTOY).

iRender
Local masks and the global switch
CONTROLS
Light pass maskOctane Object tag › Object layerMask on the middle objectse23Scopeone object, sun (s) and env (e) boxesRiskmany tags to keep track ofLights ID ActionLive Viewer › Settings › Kernels › LightKernel switchDisableID 2Scopewhole scene, sun and environment includedRiskeasy to leave on by mistakeUse masks for the look you deliver; use the global switch to inspect lights, then reset it
Per objectWhole sceneKey light (ID 2)
From OTOY: Working with Light Linking (Cinema 4D)

Before a final render, check that Lights ID Action is back to its normal state. A light group left disabled in the kernel is a common reason a render looks darker than the scene you approved.

4. Light passes: relight in compositing

The same Light pass IDs drive Octane’s lighting AOVs (OTOY: Lighting Passes). Lights that share an ID land in the same pass. OTOY explains that each pass behaves as if all the other lights in the scene were switched off, and the passes can be added together to rebuild the original render or adjusted one by one in post.

Light AOVWhat it capturesNote
AmbientLight from the sky in a daylight environment, or from the texture in a texture environmentUse for HDRI or sky light
SunlightThe sun's contributionOnly useful with a daylight environment
Light Pass 1–8Emitters assigned to that Light Pass IDIf nothing is set, all emitters go to pass 1

Source: OTOY, Lighting Passes (Cinema 4D).

Each light AOV needs a matching Light ID in the Render AOV Group, as OTOY’s Lighting AOVs page explains, so add one AOV for every ID you plan to adjust. A typical three-light product rig then splits like this:

iRender
Relighting with light passes
LIGHT PASSES
IN CINEMA 4DLIGHT AOVsCOMP GAINRESULTKeyID 2Light Pass 2key only× 1.0FillID 3Light Pass 3fill only× 0.7RimID 4Light Pass 4rim only× 1.0Sum of the passesfill lowered, no re-renderPasses added at ×1.0 rebuild the original render; change one gain to relight without rendering again
KeyFillRimComposite
From OTOY: Lighting Passes (Cinema 4D)

Plan the IDs before lighting: give every light that the client might want to adjust its own ID, and keep lights that always move together on a shared ID. Light linking and light passes use the same numbers, so write the plan down once and use it for both.

5. Why is my light still affecting the object?

iRender
Fixing light linking problems
TROUBLESHOOT
Light still hits the objectObject needs an Octane Object tagwith Use light pass mask: Enable;the light may still be on ID 1Unwanted sky or HDRI lightUntick s (sun) ore (environment)in the object's maskWhole scene darker than expectedLights ID Action left on:reset it inKernels › LightEXRLight pass AOV is emptyThe light's Light pass IDmust match theAOV's Light ID
SymptomFirst fix
From OTOY documentation for Cinema 4D

6. Rendering light passes on multi-GPU servers

Light passes come out of the same render as the beauty, so a client asking for “a bit less fill” does not need a new render when the passes are there. What grows is output size: every light AOV adds a full-resolution layer to each frame, and storage and transfer time grow with it.

We have not timed a light-pass job on our servers yet, so this section gives no specific figure. The table lists Cinema 4D + Octane runs recorded in iRender videos.

iRender test recorded on video, list prices

Octane runs measured on iRender servers

Server, frames, render time and cost, taken from iRender's benchmark videos.
Test sceneServerFramesRender timeCost at list priceVideo
Car drift scene1080p, 800 max samples5i 4x RTX 50903001h 18m 24s · 15.6 s/frame~$49.65Watch the test
Car drift scenesame scene and settings5S 4x RTX 409030018.8 s/frame (about 1h 34m)~$47 (estimated from s/frame)Watch the test
Cinema 4D animation1080p9S 8x RTX 40903201h 02m render · 1h 16m session billed~$65.87Watch the test
Sailboat animation1080p5i 4x RTX 50901202h 01m~$76.63Watch the test
How to read thisOn the same car-drift scene, 4x RTX 5090 (5i) took about 17% less time per frame than 4x RTX 4090 (5S), for about the same total cost. The other rows are different scenes, so they do not rank the servers: what is in the scene moves time per frame far more than the GPU model does.

The rows are different scenes and do not rank the servers. Render one frame with all the light AOVs you plan to deliver to measure both the time and the file size.

A test workflow for light-linked shots on an iRender server

iRender
Works 1:1 like your own PC: we keep your setup, you just get more GPUs
IaaS render farm
Your workstationscene.c4d · .blend · .hip1 GPUYour iRender serverscene.c4d · .blend · .hipup to 8 GPUs=same setupWindows or Ubuntu desktopYour software, in the version you chooseYour plugins and scriptsYour licensesYour scene and render settings, unchanged1 GPUGPU power: the only difference1, 2, 4 or 8 × RTX 5090 / 4090✓ Only the GPU count changes: open your scene and render the way you do at home
Same on both machinesTip: upload the full project folder with relative paths so textures are found
  1. Upload the project, textures and HDRIs to iRender Drive before you start the server, so upload time is not billed.
  2. Start a 4x or 8x RTX 5090 server (packages 5i or 9i); multi-GPU servers are billed per minute. Cinema 4D and OctaneRender are pre-installed; sign in with your own OTOY account. OTOY’s Studio+ plan has no GPU limit.
  3. Check that Lights ID Action is reset and that every object mask matches your light plan.
  4. Render one frame with all light AOVs and add the passes in your compositor to confirm they rebuild the beauty.
  5. Render the sequence; split long frame ranges across several servers.

FAQ

1. Where is the Light pass ID in Octane for Cinema 4D?

In the Octane Light Tag, on the Light settings tab, in the Light pass ID box at the bottom of the tab.

2. How do I exclude a light from one object in Octane?

Give the light its own Light pass ID, add an Octane Object tag to the object, set Use light pass mask to Enable on the Object layer tab, and untick that ID.

3. How many light IDs does Octane for Cinema 4D have?

OTOY’s Cinema 4D documentation lists Light pass IDs 1 to 8. Newer standalone Octane documentation describes twenty Light IDs, so check the range in your plugin version.

4. What does Lights ID Action do?

It is the global kernel switch in the Light section. Disable switches off the ticked light IDs for the whole scene; Enable lets only the ticked IDs light the scene. It also covers the sun and the environment.

5. Do Octane light passes add up to the beauty render?

Yes. OTOY explains each light pass behaves as if the other lights were off, and the passes can be added together to rebuild the original render or adjusted separately.

6. Can I exclude the sun or HDRI from an object?

Yes. The light pass mask has a box for the daylight sun (s) and one for the environment (e); untick them on the object.

7. Can I render Octane light-linked scenes on iRender?

Yes. Cinema 4D and OctaneRender are pre-installed on iRender servers with 1 to 8 RTX 5090 or RTX 4090 GPUs; sign in with your own OTOY account.

Render your Cinema 4D + Octane light-linked scenes on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 or RTX 5090 GPUs, connect by remote desktop and work on it like your own workstation.

  • Multi-GPU servers: 1x to 8x RTX 4090 (24 GB) or RTX 5090 (32 GB), AMD Threadripper PRO CPUs, 256 GB ECC RAM and 2 TB NVMe SSD.
  • Octane ready: OctaneRender is installed on the servers; you sign in with your own OTOY account and open your project in Cinema 4D as usual. Your server image is saved between sessions, and the physical machine is fully wiped before anyone else uses it.
  • Pay for what you use: billed per minute (1-hour minimum on single-GPU servers), with 10% off sessions of 3 hours or more. See pricing.
  • Elite Support, 7 days a week: by hotline, live chat, Skype, WhatsApp and email.

The quickstart below shows how to render a Cinema 4D + Octane project on an iRender server, from uploading the files to downloading the frames.

Two iRender tests show what the 4-GPU servers do with a Cinema 4D + Octane animation. In the first, 4x RTX 5090 rendered 300 frames in 1 h 18 min; the second compares 4x RTX 5090 with 4x RTX 4090 on the same scene.

New accounts get a 100% bonus on the first top-up (minimum $50). See the Octane render farm page for server options, or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , ,

Vivian Vu

Vivian Vu has written nearly 40 articles for the iRender blog, covering iRender news, Maya, Blender and real-time rendering.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →