November 14, 2026 Linh Nguyen

Blender Cycles Light Linking and Light Groups (2026): Control Lights per Object and Relight in Compositing

Quick answerPer-object lighting and relighting in Cycles
Checked Nov 2026

Light Linking lets a light illuminate only chosen objects, Shadow Linking chooses which objects block it, and Light Groups split the render into one pass per group of lights so you can rebalance them in compositing. Linking changes the render; light groups only add passes.

  • Linking: set on the light in Object Properties › Shading with a dedicated collection.
  • Include / exclude: only included: lights only those; only excluded: lights everything else.
  • Cost: shadow linking can make renders slower; the light tree makes linking most efficient.
  • Light Groups: View Layer › Passes; assign lights and world, then relight in the compositor.

A rim light that also hits the background, or a key that needs to be 20% brighter after the frames are done, are everyday lighting problems. Cycles has two separate tools for them: linking, which changes what each light does during the render, and light groups, which let you change the balance afterwards.

This guide explains how Light Linking and Shadow Linking work, what they cost at render time, how Light Groups rebuild a frame in compositing, and how to set both up so they behave the same on any machine. For the passes workflow in general, see Cycles render passes and Cryptomatte.

Checked against the Blender Manual (Light Linking, View Layer Passes), November 2026.

1. Light Linking and Shadow Linking

The Manual describes light linking as letting lights affect only specific objects, and shadow linking as controlling which objects act as shadow blockers for a light (Blender Manual: Light Linking). Its example is a character with a dedicated rim light that is not blocked by anything in the environment.

To set it up, select the light or emissive mesh, open the Cycles Shading panel in Object Properties, create a new light or shadow linking collection, and drag objects or collections from the Outliner onto the list. Linking emissive meshes is Cycles only. The Manual recommends dedicated linking collections rather than scene collections, so you can include or exclude objects without changing the scene layout.

iRender
Light Linking and Shadow Linking in Cycles
Schematic
Rimrim lightCharacterLight Linking: includeSet and propsnot in the collectionno lightwallShadow Linking: the wall does not block itRules (Blender Manual)Only included objects set:the light affects only thoseOnly excluded objects set:it affects everything elseShadow linking: renders canbe slower, extra rays tracedLight Linking picks who receives a light; Shadow Linking picks who blocks itSet on the light (or emissive mesh) in Object Properties › Shading, using dedicated linking collectionsLight linking picks what a light illuminates; shadow linking picks what blocks itBlender Manual: Light Linking
included receivernot lit
Schematic

2. Include, exclude and performance

Receivers and blockers can be included or excluded. If only included objects are set, the light affects only those; if only excluded objects are set, it affects everything except those. You can include a whole character collection and then exclude single objects inside it.

Linking is not free. The Manual notes that with shadow linking, renders can be slower and trace additional rays, because direct and indirect lighting take different paths, and that sampling for light linking is most efficient with the light tree enabled. Test a frame with and without linking if render time matters.

iRender
Include a collection, exclude one object inside it
Schematic
Rim lightlight linking setLight Linking › Receivers✓ Include: Character (collection)✕ Exclude: Swordeverything else: not lit by this lightCharacter collectionBodyHairSwordWallLit: Body and Hair (included). Not lit: Sword (excluded) and Wall (not in the list).With included objects set, a light affects only those; exclusions then remove single objects from the setBlender Manual: Light Linking
light reachesincludedexcludednot lit
Schematic, not to scale

In the example, the rim light lights the body and hair because their collection is included, skips the sword because it is excluded, and ignores the wall because it is not in the include list at all.

3. Light Groups: relight after the render

A Light Group is a limited Combined pass in which the scene is lit only by certain lights; several of them can be combined in compositing to construct the full render (Blender Manual: Passes). Create groups under View Layer Properties › Passes › Light Groups, then assign each light in Object › Shading › Light Group and the world in World › Settings › Light Group.

In the compositor, give each group pass its own multiplier and add them together. Because the passes are lit separately, you can warm the key, dim the fill or switch off the rim without rendering again. Save them in a multilayer EXR so the groups travel with each frame.

iRender
Light Groups: Relight a Frame Without Re-rendering
Schematic
Key lightsLight Group pass: Key× gainFill lightsLight Group pass: Fill× gainRim lightsLight Group pass: Rim× gainWorld lightsLight Group pass: World× gainAddin compositingRelitbeautyEach Light Group is a Combined pass lit only by its lights; adding them rebuilds the full renderAssign lights in Object › Shading › Light Group and the world in World › Settings › Light GroupEach light group is a pass lit only by its lights: scale and add them to relightBlender Manual: Passes (Light Groups)
Key groupFill groupRim groupWorld group
Schematic

Light linking and light groups solve different problems: linking changes what a light touches in the render, while light groups split the finished light into passes you can rebalance later. The table compares all three tools.

CompareBlender 5.x + Cycles

Light Linking, Shadow Linking or Light Groups?

Three tools that are often confused; they solve different problems.

ToolWhat it changesSet where
Light LinkingWhich objects a light illuminates, at render timeLight or emissive mesh › Object Properties › Shading › Light Linking
Shadow LinkingWhich objects block a light (cast its shadows), at render timeSame panel › Shadow Linking
Light GroupsNothing in the render itself; adds one limited Combined pass per group for relighting in compositingView Layer › Passes › Light Groups; lights in Object › Shading › Light Group; world in World › Settings › Light Group
When to use whichUse linking when the look must be baked into the frame; use light groups when you want to balance lights later without re-rendering.

4. Making it render the same elsewhere

Linking collections and light group assignments are stored in the .blend, so they render the same on any machine running the same Blender version. Two things break most often: a linking collection that also holds objects from a linked library whose path does not resolve, and light groups that were added to one view layer but not the one you render. Open the file on the render machine and check one frame with all the light group passes enabled before the full sequence. Our Blender Cycles pre-flight checklist covers paths and libraries.

A lighting checklist before a long render

  1. Collections: dedicated light and shadow linking collections, not scene collections
  2. Include / exclude: set so each light affects exactly the intended objects
  3. Light tree: enabled when using light linking
  4. Light Groups: created on the view layer you render, every light and the world assigned
  5. Output: light group passes saved to multilayer EXR
  6. Test: one frame compared with and without linking for render time

Both farm models render linking and light groups from the .blend. On an IaaS server you can open the scene, check that the right objects receive each light and compare render times with and without shadow linking before the full job.

Checking lighting setups on an iRender server

iRender
How iRender works: your computer controls your own multi-GPU server
IaaS render farm
Your PC or MacNo powerful GPU neededRemote desktopLive screen1:1 like your PCYOUR OWN GPU SERVERbare-metal · not sharedGPUGPUGPUGPUGPUGPUGPUGPU1, 2, 4 or 8 × RTX 5090 (32 GB) or RTX 4090 (24 GB)Threadripper PRO · 256 GB ECC RAM · 2 TB NVMe SSDFull admin access · your setup is saved between sessions1Register, top upFirst $50+ top-up doubled2Upload your projectiRender Drive, free3Start and connectRemote desktop, any OS4Render, shut downBilling stops, per minute✓ Your workstation, just more GPUs: no queue to wait, no farm plugin, no job submission, no settings changed
Your mouse and keyboardServer screen streamed back
Schematic, not to scale
  1. Upload the project folder to iRender Drive before you start the server; uploading is free and does not use rental time.
  2. Start a server with RTX 5090 (32 GB) or RTX 4090 (24 GB) GPUs and connect by remote desktop.
  3. Render one frame with all light group passes and check them in the compositor.
  4. Render the sequence and shut down; multi-GPU servers are billed per minute.

Frequently asked questions

1. What is light linking in Blender?

A Cycles and EEVEE feature that lets a light illuminate only specific objects. Shadow linking additionally controls which objects block that light.

2. Does light linking slow down Cycles?

Shadow linking can make renders slower and trace additional rays. The Manual notes that light linking samples most efficiently with the light tree enabled.

3. How do include and exclude work in light linking?

If only included objects are set, the light affects only those. If only excluded objects are set, it affects everything except those.

4. What is a Light Group in Blender?

A render pass in which the scene is lit only by the lights assigned to that group. Adding the groups together in compositing rebuilds the full render.

5. How do I assign the world to a Light Group?

In World › Settings › Light Group.

6. Can emissive meshes use light linking?

Yes, in Cycles. The Manual notes that light linking for emissive mesh objects is only available in Cycles.

Render your Blender projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. You install Blender once; your server image is saved between sessions, so Blender and your add-ons stay installed.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Blender on it:

Two Blender runs we recorded on our servers: 120 frames at 1080p on 4x RTX 5090 at 72 seconds per frame, and the same 4K scene on 4x RTX 5090 and 4x RTX 4090 at 87 and 108 seconds per frame per GPU:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Blender render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
,

Linh Nguyen

Linh Nguyen works in customer support at iRender, helping artists render Blender and Houdini projects on multi-GPU servers. She has written more than 300 articles for the iRender blog, covering Blender, Houdini and practical GPU rendering.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →