November 9, 2026 Linh Nguyen

Blender Cycles Shadow Catcher and Holdout (2026): Compositing CG into Footage

Quick answerShadow catcher and holdout in Cycles
Checked Nov 2026

In Cycles, mark a ground proxy as Shadow Catcher in Object Properties › Visibility, set Film › Transparent, and enable the Shadow Catcher pass. Since Blender 3.0 the shadow catcher also captures indirect and environment light; the release notes say to multiply the background by the Shadow Catcher pass and then alpha-over the Combined pass. Holdout makes an object a zero-alpha hole for real foreground elements.

  • Floor: Object › Visibility › Mask › Shadow Catcher.
  • Film: Render › Film › Transparent.
  • Pass: View Layer › Passes › Shadow Catcher.
  • Composite: plate × Shadow Catcher pass, then Alpha Over Combined.

Putting a CG object into real footage needs three things from the renderer: the object with alpha, the shadows it casts on the real ground, and holes where real objects pass in front. Cycles does all three with object settings and one pass.

This guide covers the shadow catcher, holdout, the Shadow Catcher pass and the compositing order, then how to render these passes for a sequence on several GPUs.

Checked against the Blender 3.0 and 3.5 Cycles release notes and the Blender Manual (Visibility, Passes), November 2026.

1. Shadow catcher and holdout

Both are set per object in Object Properties › Visibility › Mask (Blender Manual: Visibility). A Shadow Catcher object only receives shadows and light from CG objects, so a floor proxy can catch a CG car’s shadow without rendering the floor. A Holdout renders the object as a hole with zero alpha, to be filled with real footage or another render in compositing.

Blender 3.0 rewrote the shadow catcher with indirect and environment light support, an option for lights to count as real or synthetic, and a new Shadow Catcher pass for colored indirect light and emission (Blender 3.0 release).

iRender
Shadow catcher and holdout in one shot
Schematic
Scene (side view)camerapillarHoldoutCG carfloor proxy: Shadow CatcherRendered frame (Film › Transparent)hole (alpha 0)checker = transparent: only the car and its shadow are keptThe floor gives only the shadow; the pillar cuts a hole so the real pillar in the plate stays in frontBlender Manual: Visibility (Shadow Catcher, Holdout)
CG objectShadow Catcher proxyHoldout proxy
Schematic, not to scale

In the frame, the floor proxy disappears but keeps the car’s shadow, and the pillar proxy cuts through the car, so in compositing the real pillar from the plate stays in front of the CG. The table compares the settings involved.

ChoicesBlender 5.x + Cycles

Shadow catcher, holdout or indirect only?

Three object settings that look similar in a render but do different jobs.

SettingWhat it rendersTypical use
Shadow CatcherOnly the shadows and light that CG objects cast onto it; the object itself is transparentGround plane under a CG car on live-action footage
HoldoutA hole with zero alphaA real foreground object that should cover CG elements
Shadow Catcher passIndirect light and colored shadows from the catcherMultiply with the plate for accurate compositing
Film › TransparentBackground rendered as alphaNeeded so CG elements can be placed over footage
RuleModel a simple proxy of the real set, mark the floor as Shadow Catcher and real foreground objects as Holdout.

2. The Shadow Catcher pass and compositing order

The Blender 3.0 release notes explain that by default the shadow catcher only affects the alpha of the Combined pass. To handle colored indirect light and emission, use the Shadow Catcher pass: multiply the background by it, then alpha-over the Combined pass on top (Blender 3.0: Cycles). The Manual describes the pass as extra indirect light collected by shadow catcher objects, multiplied with footage using a Mix node (Blender Manual: Passes).

iRender
Shadow catcher compositing in Cycles
Schematic
Background platelive-action footageShadow Catcher passshadows + indirect lightMultiplyMix nodeCombined passCG objects + alphaAlpha OverCombined over resultFinalcomposited frameRender with Film › Transparent so the Combined pass carries alphaMultiply the plate by the Shadow Catcher pass, then alpha-over the Combined passBlender 3.0 release notes: Cycles
footageShadow Catcher passCombined pass
Source: Blender 3.0 release notes, Cycles; Blender Manual, Passes

Note that the old Shadow pass was removed in Blender 3.5 because its design was incompatible with the light tree; the release notes suggest shadow catcher passes in many cases instead (Blender 3.5: Cycles).

3. Building the proxy scene

Match the camera to the footage first, then model simple proxies of the real ground and any real objects that the CG touches or passes behind. Light the scene from an HDRI of the real location where possible, so CG reflections and shadows match the plate. Save passes to a multilayer EXR so the Shadow Catcher and Combined passes stay together; see render passes and multilayer EXR.

iRender
Proxies line up with the real set through the tracked camera
Schematic
Background plate (footage)real floorreal pillartrackTracked camera view + proxiesfloor proxy on the real floorpillar proxyShadows and holdouts are only as accurate as the camera match and the proxy placementSchematic of a camera-tracked compositing setup
floor proxy (Shadow Catcher)pillar proxy (Holdout)
Schematic, not to scale

If the floor proxy sits even slightly above or below the real floor, the caught shadow slides under the car; if the pillar proxy is offset, the real pillar and the hole will not line up. Check the overlay on several frames of the track before rendering.

4. Rendering compositing passes on several GPUs

Shadow catcher shots are usually long sequences that follow a tracked camera, which suits splitting frames across GPUs. Every instance must write the same passes to the same EXR layout, so set the output once and check one frame before the sequence; see multi-GPU rendering in Cycles. If you denoise, denoise the passes consistently for every frame, as covered in denoising Cycles animation.

A shadow catcher checklist before a long render

  1. Camera: tracked camera matches the plate
  2. Proxies: ground set as Shadow Catcher; real foreground objects as Holdout
  3. Film: Transparent enabled
  4. Pass: Shadow Catcher pass enabled in View Layer › Passes
  5. Output: multilayer EXR with the same passes for every frame
  6. Test: one frame composited over the plate before the sequence

For paths, caches and other scene checks, see our 10-point Blender Cycles pre-flight checklist.

Both farm models can render shadow catcher passes. On an IaaS server you can composite a test frame over the plate on the same machine before rendering the sequence, since the full Blender interface is available.

Rendering a shadow catcher shot on an iRender server

iRender
Works 1:1 like your own PC: we keep your setup, you just get more GPUs
IaaS render farm
Your workstationscene.c4d · .blend · .hip1 GPUYour iRender serverscene.c4d · .blend · .hipup to 8 GPUs=same setupWindows or Ubuntu desktopYour software, in the version you chooseYour plugins and scriptsYour licensesYour scene and render settings, unchanged1 GPUGPU power: the only difference1, 2, 4 or 8 × RTX 5090 / 4090✓ Only the GPU count changes: open your scene and render the way you do at home
Same on both machinesTip: upload the full project folder with relative paths so textures are found
  1. Upload the project and the plate to iRender Drive before you start the server; uploading is free and does not use rental time.
  2. Start a server with RTX 5090 (32 GB) or RTX 4090 (24 GB) GPUs and connect by remote desktop.
  3. Render and composite one frame to check shadows, alpha and passes.
  4. Render the sequence one Blender per GPU, then shut down; multi-GPU servers are billed per minute.

Frequently asked questions

1. How do I make a shadow catcher in Blender Cycles?

Select the ground proxy, open Object Properties › Visibility › Mask and enable Shadow Catcher. Set Render › Film › Transparent.

2. What is the Shadow Catcher pass for?

It holds the indirect light and colored shadows caught by shadow catcher objects. Multiply the background by it, then alpha-over the Combined pass.

3. What is the difference between Shadow Catcher and Holdout?

A shadow catcher shows only the shadows and light falling on it; a holdout cuts a zero-alpha hole for a real foreground object.

4. Where did the Shadow pass go?

It was removed in Blender 3.5 because its design was incompatible with the light tree. Shadow catcher passes can be used instead in many cases.

5. Does the shadow catcher work in EEVEE?

This guide covers Cycles; the indirect-light shadow catcher and its pass were introduced for Cycles in Blender 3.0.

Render your Blender projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. You install Blender once; your server image is saved between sessions, so Blender and your add-ons stay installed.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Blender on it:

Two Blender runs we recorded on our servers: 120 frames at 1080p on 4x RTX 5090 at 72 seconds per frame, and the same 4K scene on 4x RTX 5090 and 4x RTX 4090 at 87 and 108 seconds per frame per GPU:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Blender render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
,

Linh Nguyen

Linh Nguyen works in customer support at iRender, helping artists render Blender and Houdini projects on multi-GPU servers. She has written more than 300 articles for the iRender blog, covering Blender, Houdini and practical GPU rendering.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →