Redshift Shadow Catcher and Matte Objects in Cinema 4D: Compositing CG onto a Backplate
Redshift turns any object into a matte through the Redshift Object tag. Check these before a backplate render:
- Where: Redshift Object tag › Matte tab, with Override on; settings also apply to child objects
- Matte: Enable makes the object invisible and reveals the environment behind it
- Shadow: Shadow › Enable turns the matte into a shadow catcher
- Alpha: Affects Alpha writes shadows into the alpha channel when the matte Alpha is above 0
- Legacy: the old Matte Shadow Catcher material is deprecated; use the tag instead
Putting a CG product or character into live-action footage depends on one detail more than any other: contact shadows. Without them the object floats above the ground in the photo. In Redshift for Cinema 4D the shadow comes from a matte object, usually a simple plane that matches the real ground, which stays invisible but catches the shadows your CG object casts.
This guide explains the matte and shadow options of the Redshift Object tag, how to set up a ground plane step by step, the two ways to deliver the result (plate inside the render, or plate added in compositing), and the settings behind the most common problems.
Checked against the Maxon documentation for Redshift Matte Options, the Redshift Object tag Matte tab and Integrated AOVs (Cinema 4D 2026), November 2026.
1. What is a matte object in Redshift?
A matte object is ordinary geometry that Redshift renders as a hole. With the matte enabled, the object becomes invisible in the beauty render with default settings and reveals the environment behind it instead (Maxon: Matte Options). The options live in the Matte tab of the Redshift Object tag and affect the tagged object and its children (Maxon: Redshift Object tag, Matte).
Maxon describes the tag options as a more practical alternative to the deprecated Matte Shadow Catcher material, because no custom shader is needed per object (Maxon: Matte Shadow Catcher). Older scenes may still use that material; new scenes should use the tag.
The three panels show why both switches matter. The plane alone hides the photo. The matte alone cuts the plane out but leaves the object hanging in the air. With the shadow option on as well, the plate shows through and the shadow of the CG object lands on it, which is what makes the object sit on the real ground.
2. How to set up a shadow catcher in Redshift (step by step)
Settings checklist (copy or follow line by line):
Step 1: Match the ground
Add a plane where the real ground is in the plate and line up the camera to the footage. Assign a material to the plane; the matte only shows reflections, refraction or GI that the underlying material actually has.
Step 2: Add the Redshift Object tag
Right-click the plane, add the Redshift Object tag from Render Tags, open the Matte tab and turn on Override. Then enable Matte.
Step 3: Show the plate
Leave Show Background on so the environment, for example a dome light with the backplate, appears where the plane is. With it off the matte renders black.
Step 4: Catch the shadow
Under Shadow, turn on Enable. Set Color to the darkest shadow you see in the photo and use Transparency to lighten it; a value of 1 is the same as no shadow (Maxon: Matte Options).
Step 5: Decide where the shadow goes
If the plate will be added in compositing, turn on Affects Alpha so the shadow is stored in the alpha channel. Maxon notes the matte Alpha must be above 0 for this to work.
3. Which matte options change the look?
Most scenes only need the steps above. The rest of the options are for reflections, bounce light and multi-object setups. The table lists them with Maxon’s defaults.
Matte and shadow options
Defaults and use, from Maxon Matte Options
| Option | Default | What it changes |
|---|---|---|
| Show Background | On | Off renders the matte black instead of showing the environment |
| Apply to Secondary Rays | Off | On also hides the matte in reflections, refractions and GI |
| Affected by Matte Lights | Off | Lets matte shadow illuminator lights add diffuse light; needs Diffuse Scale above 0 |
| Include in Puzzle Mattes | Off | Adds the matte to puzzle matte AOVs |
| Alpha | 1 | 0 cuts the matte completely out of the alpha channel |
| Reflection / Refraction / Diffuse Scale | 0 | Brings back reflections, refraction or GI from the plane’s material, for example a wet floor |
| Receive Shadows from Mattes | On | Lets mattes catch shadows from other mattes |
Lights matter too. A light set as a matte shadow illuminator in its Contribution settings can light the matte diffusely; lights without that setting still cast shadows on mattes but do not light them (Maxon: Matte Options). Note that matte options are not supported on ray-marched volumes.
4. Plate in the render or plate in compositing?
There are two clean ways to deliver the shot, and they need different settings.
Path A is quicker for stills and simple shots: the frame comes out finished. Path B suits footage that will be graded or tracked again, because the plate stays untouched in comp. Maxon’s own example uses a dome light with its alpha set to 0, so the environment is transparent and the plate shows through only in the composite.
For extra control, Redshift’s integrated AOVs include a Background AOV, which holds the backplate and environment (Maxon: Integrated AOVs), and a Shadows AOV. Maxon notes that shadows normally visible in the Diffuse Lighting AOV are not present for a matted object, so in comp you multiply the background by the shadow pass (Maxon: Integrated AOVs, Shadows).
5. Common shadow catcher problems and their causes
When the caught shadow looks wrong
Causes based on Maxon Matte Options
| Symptom | Likely cause | Fix |
|---|---|---|
| Matte area renders black | Show Background is off | Turn it on, or add the plate in comp |
| Plane missing from reflections in the CG object | Apply to Secondary Rays is on | Turn it off so the plane still reflects |
| No shadow in the alpha channel | Affects Alpha off, or matte Alpha at 0 | Turn on Affects Alpha and keep Alpha above 0 |
| Shadow far too dark or too soft | Color and Transparency not matched to the plate | Sample the darkest real shadow and adjust Transparency |
| Ground looks unlit next to the object | No matte shadow illuminator, or Diffuse Scale 0 | Enable the illuminator on the light and raise Diffuse Scale |
| Shadow missing on a volume | Matte options are unsupported for ray-marched volumes | Use a separate pass for the volume |
Check one frame over the plate and then the alpha channel on its own; most of these issues show up in the alpha before anyone sees them in the composite.
6. SaaS or IaaS render farm for backplate shots?
Which farm type fits a backplate composite
Both farm types render Redshift mattes; the difference is how you check the match to the footage.
| Situation | Usually a better fit | Why |
|---|---|---|
| Shot already matched and approved | SaaS | Upload the scene and collect frames without managing a machine |
| Shadow color and density still being matched to the plate | IaaS | You open the scene on the render machine and compare against the plate interactively |
| Large plate sequences and HDRIs | Either | Both need the plates uploaded; check the paths before rendering |
| Studio pipeline with its own submit tools | Either | Pick the farm that supports your submit workflow |
Rule of thumb: if the match to the footage is still being judged, use a machine you can open; if it is signed off, a submit-and-collect farm is simpler.
Rendering a backplate shot on an iRender server
On iRender you work on the render machine itself, so the shadow match is checked on the same GPUs that render the sequence:
- Upload the project, plate sequence and HDRI to iRender Drive before you start a server; uploading is free and does not use rental time.
- Start a server with RTX 5090 (32 GB) or RTX 4090 (24 GB) GPUs. Cinema 4D and Redshift are pre-installed.
- Render one frame over the plate, then check the alpha channel and the shadow density against the footage.
- Render the range from the Picture Viewer or Render Queue, then shut down. Multi-GPU servers bill per minute; 1-GPU servers have a one-hour minimum.
Redshift shadow catcher checklist
Tick each item before you send the full range to any machine.
Frequently asked questions
1. How do I make a shadow catcher in Redshift for Cinema 4D?
Add a Redshift Object tag to a ground plane, open the Matte tab, turn on Override and Matte, then enable Shadow. The plane becomes invisible but catches the shadows of your CG objects.
2. Is the Redshift Matte Shadow Catcher material still used?
It is deprecated. Maxon recommends the matte options of the Redshift Object tag instead, which work without a custom shader per object.
3. Why does my matte object render black?
Show Background is off. With it on, the matte shows the environment, such as a dome light backplate, in its place.
4. How do I get the shadow into the alpha channel?
Turn on Affects Alpha in the Shadow section and keep the matte Alpha above 0. Maxon notes the shadow is only stored in alpha when the matte Alpha is greater than 0.
5. Why is the ground plane missing from reflections?
Apply to Secondary Rays is on, which hides the matte in reflections, refractions and GI too. Turn it off if the CG object should still reflect the ground.
6. How do I make the caught shadow lighter or tinted?
Use the Shadow Color for the tint of the darkest shadow and Transparency to lighten it. A Transparency of 1 removes the shadow completely.
7. Can a matte object show reflections like a wet floor?
Yes. Raise Reflection Scale on the matte; it brings back reflections from the plane’s own material, so that material needs a reflective component.
8. Can I render matte and shadow shots on a multi-GPU iRender server?
Yes. Cinema 4D and Redshift are pre-installed on iRender servers with 1, 2, 4 or 8 RTX 5090 or RTX 4090 GPUs, and you can check the shadow against the plate on the same machine before rendering.
Render your Cinema 4D and Redshift projects on iRender
iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. Your server image is saved between sessions, so your plugins and settings stay installed. Cinema 4D and Redshift are pre-installed on every server.
Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.
This quick start shows how to start a server and render Cinema 4D and Redshift on it:
Two Redshift runs we recorded on our servers: 150 frames at 1080p on 4x RTX 5090 at 40.84 seconds per frame (about 1h 42m), and a 301-frame cloth simulation at 1080p on 1x RTX 5090 at 21.3 seconds per frame:
New users get a 100% bonus on the first top-up (minimum $50). See plans on the Cinema 4D and Redshift render farm page or download the iRender GPU app.
Sources: Maxon: Matte Options · Maxon: Redshift Object tag, Matte · Maxon: Matte Shadow Catcher (deprecated) · Maxon: Integrated AOVs · Maxon: Integrated AOVs, Shadows. Checked November 2026.




