Karma Holdouts, Shadow Catchers and Phantom Objects in Houdini
Karma has three tools for CG over live action: holdout modes, the Shadow Catcher LOP (Houdini 21+) and the Background Plate LOP. Know which one you need:
- Matte: Holdout Mode = Matte cuts a hole in the alpha
- Background: Holdout Mode = Background shows the plate and catches shadows into holdout AOVs
- Shadow Catcher: LOP that makes chosen prims receive shadows at render time (H21+)
- Phantom: render visibility -primary: invisible to camera, still casts shadows
- LPEs: shadow;C.*[LO] and holdout;C.*[LO] work on Karma XPU
Most CG shots end up over a plate: a car on a real road, debris on a filmed floor, a creature behind a live actor. The CG needs to be cut out where real objects stand in front of it, and its shadows and reflections need to land on surfaces that exist only in the plate. Karma handles this with holdout objects, a Shadow Catcher LOP, a Background Plate LOP and shadow and holdout light path expressions.
This guide explains what each tool does, which AOVs they produce, how the compositor puts them back together, and what to check on Karma XPU before a long render.
Checked against the SideFX Houdini 22 documentation (Render Geometry Settings, Karma Shadow Catcher, Karma Background Plate 2.0, Light Path Expressions, Karma XPU), November 2026.
Matte, background holdout and phantom objects
The Render Geometry Settings LOP controls how an object takes part in the render. Its Holdout Mode has two holdout settings: Matte makes the object a cutout matte, and Background is similar but meant for background plate setups. Its Render Visibility uses a category expression to control which ray types see the object; SideFX’s example for a phantom object is the expression -primary, which hides it from camera rays while it still casts shadows and shows in reflections.
Use Matte for real foreground objects that should hide CG behind them, Background for proxy geometry of the set that should catch shadows and reflections, and phantom for helpers such as a proxy actor that should cast a shadow but never appear.
Sources: Render Geometry Settings LOP.
Karma Shadow Catcher and Background Plate LOPs
Houdini 21 added the Karma Shadow Catcher LOP, which configures render-time holdout or matte objects. Its Primitives parameter picks the prims that receive shadows, Blocks Lighting stops light from passing through the catcher if it leaks, and Replace Prim Material swaps the catcher’s material for a simple grey diffuse at render time.
The Karma Background Plate LOP sets up AOVs and holdout objects that leave holes through which the background is visible. It sets the objects’ Holdout Mode to Background, takes a plate image with scale and translate controls, and creates holdout AOVs:
- Holdout Shadows, in one AOV or one per light LPE tag;
- Holdout Diffuse, Holdout Emission and Holdout Glossy Reflection for light that bounces off the holdouts;
- Holdout Reflection Occlusion, when glossy reflection is on.
The help gives the compositing formula that matches the viewport: beauty over the plate multiplied by the inverse of holdout shadows plus reflection occlusion, plus holdout diffuse, emission and glossy reflection. Giving the compositor these AOVs lets them change shadow density without rendering again.
Sources: Karma Shadow Catcher LOP, Karma Background Plate 2.0.
Shadow and holdout passes with LPEs
Sometimes the compositor only needs a shadow pass. Karma’s light path expressions have two prefixes for that: shadow;C.*[LO] returns the ratio of occluded to unoccluded light from the beauty pass, and holdout;C.*[LO] returns the beauty pass of holdout objects. Karma XPU supports LPEs including shadow and holdout ones.
Add them as Extra Render Vars on the Karma Render Settings LOP. Combined with an LPE tag on a light, the same prefixes can isolate one light’s shadow. Our Karma light groups guide explains LPE tags.
Sources: Light Path Expressions, Karma XPU.
Checks before rendering holdouts on Karma XPU
- Render one frame on XPU and open the AOVs. Holdout setups combine several features; check that every holdout AOV exists and composites back to the viewport look before the full sequence.
- Deep output: Houdini 22 adds DCM Exclude Holdouts, which stops holdouts from generating deep samples, keeping deep files smaller when you render deep for compositing.
- Memory: holdout and set-proxy geometry is still in the scene on every GPU; keep proxies light.
- Per-light shadows: holdout shadow AOVs per LPE tag multiply the AOV count, and each AOV adds frame-buffer memory; see our Karma AOV guide.
Sources: What’s new in Houdini 22: Karma, Karma Background Plate 2.0.
SaaS or IaaS render farm for plate integration shots?
Which farm type fits a holdout shot
Both render holdouts; they differ in how easily you can check the AOVs against the plate.
| Situation | Usually a better fit | Why |
|---|---|---|
| Holdout AOVs already approved by comp | SaaS (managed farm) | Submit and collect the EXRs |
| Shadow density or reflections still being tuned | IaaS (remote workstation) | Render a frame, composite over the plate, adjust in the same session |
| Plate and set proxies need specific paths | IaaS | Keep the plate and proxies on the machine with your project paths |
| Deep output for compositing | IaaS | Check deep file sizes and holdout exclusion before the full run |
| Short one-off render | SaaS | No setup time |
Rule of thumb: once the holdout AOVs composite correctly, a managed farm is the least work. While you are still matching shadows to the plate, a machine you control saves round trips.
Rendering holdouts on an iRender server
On iRender you rent a whole Windows workstation, install your own Houdini build and sign in with your own SideFX license, so the scene opens exactly as on your desk:
- Upload the project, plate images and set proxies through iRender Drive with relative paths.
- Start a 4x RTX 5090 server (32 GB per card), which we recommend for Karma XPU; 8x servers also render Karma XPU, but it does not get proportionally faster.
- Install your Houdini build. The Karma XPU kernels compile on the first render and the cache stays on your saved server image.
- Render one frame and composite the holdout AOVs over the plate with the formula from the Background Plate help.
- Render the range with husk or the USD Render ROP.
Holdout checklist
Use this as a final check before you start the full range on any machine.
Frequently asked questions
1. How do I make an object a holdout in Karma?
Set Holdout Mode on the Render Geometry Settings LOP: Matte for a cutout, Background for a background plate setup.
2. Does Karma have a shadow catcher?
Yes. Houdini 21 added the Karma Shadow Catcher LOP, which makes chosen prims receive shadows at render time.
3. How do I make a phantom object in Karma?
Set its render visibility expression to -primary. It is hidden from camera rays but still casts shadows and shows in reflections.
4. How do I get a shadow pass from Karma?
Add an Extra Render Var with the LPE shadow;C.*[LO], or use the Holdout Shadows AOV from the Background Plate LOP.
5. Do holdout LPEs work on Karma XPU?
Yes. The Karma XPU page lists LPEs, including shadow and holdout ones, as supported.
6. How do I composite Karma holdout AOVs?
The Background Plate help gives: beauty over (plate × invert(holdout shadows + reflection occlusion) + holdout diffuse + emission + glossy reflection).
7. Is the Shadow Catcher visible in the viewport?
The Shadow Catcher LOP makes prims receive shadows at render time without being visible in the viewport; Replace Prim Material can swap their material for a simple grey diffuse during the render.
Render your Houdini Karma XPU scenes on iRender
iRender is an IaaS GPU render farm: you rent a bare-metal server with 4x NVIDIA RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. You install Houdini and use your own SideFX license; your server image is saved between sessions, so Houdini, your packages and the Karma XPU kernel cache stay installed. For Karma XPU we recommend the 4-GPU servers.
Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.
This video walks through rendering a Houdini Karma XPU scene on an iRender server in five steps:
New users get a 100% bonus on the first top-up (minimum $50). See the Karma XPU render farm page for server options, or download the iRender GPU app.
Sources: Render Geometry Settings LOP, Karma Shadow Catcher LOP, Karma Background Plate 2.0, Light Path Expressions, Karma XPU, What’s new in Houdini 22: Karma. Checked November 2026.
If Karma XPU renders are slow on your machine, iRender’s Karma XPU render farm gives you a dedicated remote server where you install Houdini, bring your own license and render on multiple RTX 5090 GPUs (for Karma XPU, 4 GPUs is usually the most efficient setup).


