April 21, 2025 Kath Nguyen

Best PC Specs for Blender in 2026: CPU, GPU, RAM and Storage

Executive SummaryKey Takeaways: Building a PC for Blender
Blender 5.x

What each part of a Blender PC does, and how much of it you need:

  • Official baseline: Blender recommends an 8-core CPU, 32 GB of RAM and a GPU with 8 GB of VRAM. The minimum is 4 cores, 8 GB of RAM and 2 GB of VRAM (blender.org).
  • CPU: high clock speed matters most for modeling and animation; many cores matter for CPU rendering and fluid simulation (Puget Systems).
  • GPU: for Cycles the GPU sets the render time and its VRAM sets which scenes you can render at all. Puget Systems names the RTX 5090 the fastest consumer GPU for Blender.
  • On iRender: 1x to 8x RTX 4090 (24 GB) or RTX 5090 (32 GB) servers, so you can time your own scene on a card before you buy it or book render time.

Blender runs on modest hardware, but the parts that make it fast depend on what you do in it. Modeling and animation lean on the CPU’s clock speed, Cycles rendering leans on the GPU and its memory, and fluid simulations lean on CPU cores and RAM. This guide starts from Blender’s official requirements, goes through the CPU, GPU, RAM and storage with current recommendations from Puget Systems, then gives three example builds and a way to test your own scene before you spend money.

Checked against the Blender requirements, the Blender 5.0 release notes, the Blender Manual, Puget Systems and NVIDIA specifications, November 2026.

Blender’s official minimum and recommended specs

The Blender Foundation publishes the same table for Windows and Linux (Macs need Apple Silicon). Treat the recommended column as the floor for regular work, not as a target:

ComponentMinimumRecommended
Operating systemWindows 8.1 (64-bit), or Linux with glibc 2.28 or newerWindows 10 or Windows 11
CPU4 cores with SSE4.2 support8 cores
RAM8 GB32 GB
GPU2 GB VRAM with OpenGL 4.38 GB VRAM

Source: blender.org hardware requirements.

Blender 5.0 also raised the GPU floor for Cycles. NVIDIA cards now need compute capability 5.0, roughly the GeForce 900 series and newer, and AMD cards on Windows need the Adrenalin 24.9.1 driver or newer (Blender 5.0 release notes). AMD GPU rendering through HIP needs an RDNA1 card or newer (Blender Manual).

Which part does the work in Blender

A Blender PC is not one balance of parts for everyone. Look at where you spend your time, then put the money into the part that task uses:

What you doMain partWhat to look for
Modeling, sculpting, rigging, animation playbackCPU (a few fast cores)High clock speed
Cycles rendering on the GPUGPUVRAM that fits your scenes; an NVIDIA RTX card for OptiX
Cycles rendering on the CPUCPU (all cores)Core count
Fluid simulationCPU (many cores) and RAMCore count and RAM capacity
Cloth and rigid-body simulationCPU (a few fast cores)Clock speed
EEVEE and the viewportGPUA current GPU with enough VRAM for your textures
Large scenes, caches and texturesRAM and SSD32–64 GB of RAM or more; NVMe storage

Based on Puget Systems’ Blender hardware recommendations and the Blender Manual.

Best CPU for Blender in 2026

For modeling and animation, Puget Systems recommends an Intel Core Ultra or AMD Ryzen 9000 series processor, and notes that high clock speeds have the greatest effect on these tasks as projects get more complex. Extra cores do little here. A lower-core chip such as the Ryzen 7 9700X keeps the cost down; higher-core models such as the Core Ultra 7 270K Plus and Ryzen 9 9950X3D are the better pick if you also render on the CPU.

Simulations split two ways. Cloth and rigid-body simulations use only a few fast cores, while fluid simulations use many. For heavy fluid work or CPU rendering, Puget names AMD’s Threadripper PRO 9995WX, with 96 cores and support for up to 1 TB of RAM, as the fastest option.

If you render on the GPU, the CPU matters less for render time, but it still loads the scene and feeds the cards. A workstation with several GPUs also needs a platform with enough PCIe lanes for all of them, which is why multi-GPU machines usually use Threadripper PRO; the Threadripper PRO 5975WX in our 4- and 8-GPU servers has 128 PCIe lanes.

GPU and VRAM for Blender rendering

For Cycles GPU rendering, the graphics card sets the render time. Puget Systems names the GeForce RTX 5090 the fastest consumer GPU for Blender, says RTX 40 and 50 series cards also perform well, and reports that NVIDIA has a significant rendering lead over AMD because of OptiX and CUDA. Professional cards are not required, though they often have more VRAM.

VRAM decides which scenes you can render at all. Each GPU only uses its own memory, so a second card adds speed, not room. When the memory is full, Cycles falls back to system RAM, which is slower (Blender Manual). Puget’s advice is to buy more VRAM than you think you need.

For a deeper look at VRAM, OptiX and multi-GPU, read our guide to choosing a GPU for Blender rendering, and our NVIDIA vs AMD comparison for Blender.

iRender
How much GPU memory the common Blender cards have
To scale
GPU memory per card, drawn to scale (GB)0 GB8 GB16 GB24 GB32 GBBlender minimum2 GBBlender recommended8 GBRTX 508016 GB GDDR7RTX 409024 GB GDDR6XRTX 509032 GB GDDR7Two cards in one PC: each holds its own copy of the sceneRTX 5090 #1full scene copy, 32 GBRTX 5090 #2full scene copy, 32 GBlargest scene:still 32 GB,not 64 GB✓ A second GPU adds speed, not room: Cycles uses only each card's own memory and moves overflow to slower system RAM.Sources: blender.org requirements; NVIDIA GeForce RTX 5080, 4090 and 5090 specifications; Blender Manual: GPU Rendering.
RTX 5090, 32 GBRTX 5080 and RTX 4090Blender requirements
Drawn to scale

How to read the figure. The top five bars are drawn to the same scale, so their length is the memory each card has: the Blender minimum and recommended figures, then the RTX 5080, 4090 and 5090. Find the size of your heaviest scene on the axis; every card whose bar ends to the left of that point cannot hold it without falling back to slower system RAM. The lower part shows why a second card does not help with size: both RTX 5090 cards hold their own full copy of the scene, so the limit stays at 32 GB.

How much RAM does Blender need?

Blender recommends 32 GB. Puget Systems puts it in steps: 16 GB works for small projects, 32 GB suits larger ones, 64 GB or more makes sense if you run other heavy applications at the same time, and 64 to 128 GB is the usual range for high-end users. Fluid simulations and very large scenes sit at the top of that range. RAM also has a second job: when a scene does not fit in VRAM, Cycles uses system memory for the overflow.

iRender
How much RAM a Blender PC needs
To scale
System RAM steps for Blender, drawn to scale (GB)16 GBsmall projects32 GBlarger projects; the Blender recommendation64 GBother heavy apps open at the same time128 GBhigh-end range: fluids, very large scenesRAM has a second job: when the scene does not fit in VRAM, Cycles keeps the overflow in system memory,so a GPU-heavy scene can need more RAM than the modeling work suggests.Sources: Puget Systems Blender hardware recommendations; blender.org requirements; Blender Manual: GPU Rendering.
High-end rangeCommon stepsSmall projects
Drawn to scale

How to read the figure. The four bars are the RAM steps Puget Systems gives for Blender, drawn to scale. Pick the step that matches your largest project, then move one step up if you keep other heavy applications open or simulate fluids. The note under the bars is the part that is easy to miss: when a scene overflows the GPU, the overflow lives in system RAM, so a GPU-heavy scene raises your RAM needs as well.

Storage for Blender projects

Puget Systems recommends one NVMe SSD of 500 GB or more for the operating system and applications, plus a second 1 or 2 TB NVMe SSD for project files. A SATA SSD or hard drive can hold material and reference libraries and backups, and network-attached storage is practical now that many workstation motherboards include 10Gb Ethernet.

Three example Blender PC builds

These are our suggestions, built from Blender’s requirements and Puget’s recommendations above. Prices change quickly, so the table lists parts rather than prices:

PartLearning and modelingGPU rendering (freelance)Simulation and heavy production
CPURyzen 7 9700X or a similar 8-core chipRyzen 9 9950X3D or Core Ultra 7 270K PlusThreadripper PRO, up to the 9995WX
GPUNVIDIA RTX card with 8–12 GBRTX 5080 (16 GB) or RTX 5090 (32 GB)One or more RTX 5090 (32 GB each)
RAM32 GB64 GB128 GB or more
Storage1 TB NVMe SSD500 GB NVMe + 2 TB NVMe500 GB NVMe + 2 TB NVMe + NAS or hard drive

Our suggestion based on the sources in this article, not a benchmark result.

The middle column is where most Blender artists end up. If your renders already take hours on that machine, adding a second or third GPU at home is expensive; renting a multi-GPU server for the long jobs is the other option, and the next section compares the two kinds of render farm.

Before you order parts, go through this list; each line sums up a section above.

ChecklistBlender PC spec checklist
0 / 7 done
Tip: tick each item as you set up the job; the ticks reset when the page reloads.

SaaS or IaaS render farm when you are sizing a Blender PC?

Blender renders the same on any farm that runs the same Blender version and add-ons; the frames come from your .blend file. The difference is what you can do around the render. On a SaaS render farm you upload the file, the farm picks the hardware and returns frames and logs. On an IaaS render farm such as iRender you rent a specific GPU server, open the scene yourself and see its memory use and render time on that exact card.

Your situationSaaS render farmIaaS render farm (iRender)
The scene is finished, fits in VRAM, and you need frames for a deadlineA good fit: upload, submit and download frames, with no machine to manageWorks too, but you install Blender and start the server yourself
You have a deadline and need to know when rendering starts and endsJobs join the farm’s queue, so the start time depends on how busy the farm is; many farms sell higher-priority plans to start soonerThe server runs only your job from the moment it boots, so you control when rendering starts and can time the whole job
You are choosing between a 16 GB and a 32 GB cardYou see render times on the farm’s hardware, not on a card you chooseRent a 1-GPU RTX 4090 (24 GB) or RTX 5090 (32 GB) server and time your own scene on it
The scene may not fit in your card’s VRAMThe log tells you after the job whether it fittedOpen the scene and watch memory use in the render window before you commit
You need more GPUs than your PC can holdThe farm spreads frames across its own machinesRent a 2x, 4x or 8x server; Cycles uses all the GPUs in one render
You rely on specific add-ons or a specific Blender buildDepends on what the farm supportsInstall any Blender version and add-ons, with administrator access

A comparison of how the two farm models work for this task, not a speed test.

A simple rule: if the scene is ready and you only need frames, a SaaS farm is the shorter path. If you are still deciding what to buy, or need to know whether a scene fits in 24 or 32 GB, you need a machine you can open and measure, which is what an IaaS server gives you.

A hardware test workflow on an iRender server

iRender
Works 1:1 like your own PC: we keep your setup, you just get more GPUs
IaaS render farm
Your workstationscene.c4d · .blend · .hip1 GPUYour iRender serverscene.c4d · .blend · .hipup to 8 GPUs=same setupWindows or Ubuntu desktopYour software, in the version you chooseYour plugins and scriptsYour licensesYour scene and render settings, unchanged1 GPUGPU power: the only difference1, 2, 4 or 8 × RTX 5090 / 4090✓ Only the GPU count changes: open your scene and render the way you do at home
Same on both machinesTip: upload the full project folder with relative paths so textures are found

How to read the figure. The left box is your own workstation and the right box is the iRender server: the same desktop, software version, plugins, licenses and scene settings. The only change is the number of GPUs, from 1 up to 8 RTX 5090 or RTX 4090, so you can measure your own scene on the card you are thinking of buying before you spend money on it.

  1. Upload first. Put the .blend file and textures in iRender Drive before you start a server; transfer and storage are free and no rental time runs while you upload.
  2. Pick the card to test. RTX 4090 servers (3S, 4S, 5S, 9S) have 24 GB per GPU; RTX 5090 servers (3i, 4i, 5i, 9i) have 32 GB. A 1-GPU server gives you a per-card result; 1-GPU servers have a one-hour minimum, multi-GPU servers bill per minute.
  3. Install Blender. Blender is not pre-installed: download the exact version you use from blender.org (the portable .zip runs without installing) and add your add-ons.
  4. Measure. Set OptiX in Preferences, render the heaviest frame at final settings and note the time and the memory figure in the render window.
  5. Render or decide. If it fits and the time works, render on a 2x, 4x or 8x server, or split frame ranges across several servers for a deadline. Blender needs no render licenses, however many servers you run.

Frequently asked questions

1. What are the recommended PC specs for Blender?

Blender recommends an 8-core CPU, 32 GB of RAM and a GPU with 8 GB of VRAM. For regular Cycles rendering, 64 GB of RAM and a GPU with 16 GB of VRAM or more give more headroom.

2. What is the best CPU for Blender?

It depends on the work. For modeling and animation, pick a CPU with a high clock speed, such as an Intel Core Ultra or AMD Ryzen 9000 chip. For CPU rendering and fluid simulation, more cores help, up to AMD Threadripper PRO.

3. Is the CPU or the GPU more important for Blender?

For Cycles GPU rendering and EEVEE, the GPU. For modeling, animation and simulations, the CPU. Most Blender users do best with a fast CPU and an NVIDIA RTX GPU with plenty of VRAM.

4. How much RAM do I need for Blender?

32 GB is Blender’s recommendation and is enough for most scenes. Use 64 GB for larger scenes and simulations, and 64 to 128 GB for heavy production work.

5. Do I need a professional GPU for Blender?

No. GeForce RTX cards render Cycles well; professional cards mainly add more VRAM.

6. How can I test Blender on a GPU before buying it?

Rent a server with that GPU, install your Blender version, and render your heaviest frame at final settings. Note the render time and the memory figure in the render window.

7. Is a gaming PC good for Blender?

Yes, in most cases. Blender runs on the same GeForce RTX cards that gaming PCs use, and professional cards are not required. What to check is memory: Blender recommends 32 GB of RAM and 8 GB of VRAM, and for Cycles rendering more VRAM matters more than a higher frame rate in games.

Render your Blender projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. Your server image is saved between sessions, so Blender and your add-ons stay installed.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Blender on it:

Two Cycles runs we recorded on our servers: 120 frames at 1080p on 4x RTX 5090 at 72 seconds per frame, and the same 4K scene on 4x RTX 5090 and 4x RTX 4090 at 87 and 108 seconds per frame per GPU:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Blender render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , ,

Kath Nguyen

Kath Nguyen works in customer support at iRender, helping artists move Blender and Cinema 4D projects to multi-GPU servers. She has written more than 140 articles for the iRender blog.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →