November 14, 2026 Maddie Quach

Alembic Characters and Deformation Motion Blur in Redshift for Maya

Motion blurMotion blur on cached characters in Redshift for Maya
From Maxon and Autodesk documentation

Cached characters blur only when the cache and the render settings agree. Check these before a long batch:

  • Deformation Blur: off by default; turn it on for skinned or cached characters
  • Steps: deformation blur allows 2, 3, 5, 9 or 17 steps; more steps use more memory
  • Alembic export: Frame relative sample stores sub-frame data for shutter open and close
  • Motion Vector AOV: enabling it turns off Redshift motion blur in the beauty render
  • Proxies: export moving .rs proxies with motion blur enabled

Character shots usually reach the lighting scene as Alembic caches: the animator bakes the rig, and lighting loads the mesh without the rig. The frames look right until motion blur is turned on, and then the camera and props blur while the character stays sharp, or fast hands smear in straight lines.

This guide explains which Redshift motion blur type a cached character needs, how to export an Alembic cache that carries sub-frame data, how to set Deformation Steps, how to load the cache in Maya or through the Redshift Alembic Procedural, and how to fix the usual blur problems before rendering the full range.

Checked against Maxon’s Redshift for Maya documentation (Motion Blur, Motion Blur – Production, Alembic Procedural, Intro to Proxies) and Autodesk’s Maya Alembic Export Options, November 2026.

1. Which motion blur does a cached character need?

Redshift supports three kinds of motion blur: camera blur from camera movement, transformation blur from object or light transforms, and deformation blur when vertices move because of morphing or skinning (Maxon: Motion Blur). An Alembic character has no rig in the lighting scene, so almost all of its movement is vertex deformation. Deformation Blur is disabled by default, and Maxon notes it can be memory-intensive, especially on high-poly or displaced geometry (Maxon: Motion Blur – Production). Crowds have their own motion blur option; see Golaem crowds with Redshift for Maya.

iRender
Alembic Motion Blur: Samples and Deformation Steps
Schematic
A · Shutter window vs Alembic samplesFrame 10 rendered with the shutter centred on the frameshutter openWhole-frame cacheFrame relative samplesframe 9frame 10frame 11Top row: only one real sample inside the shutterBottom row (−0.25 / 0 / +0.25): shutter open and close on diskB · Deformation Steps on one vertexRedshift draws the vertex path as straight segmentsreal path in the cache2 steps: one straight line, the curve is lost5 steps: four segments follow the curve, more memoryAllowed values: 2, 3, 5, 9 or 17 steps
whole-frame samplesub-frame sample / 5 steps2 stepsshutter window
Schematic · based on Maxon and Autodesk docs

Panel A shows why the cache matters as much as the render setting: if the file holds one sample per frame, there is only one real sample inside the open shutter. Panel B shows Deformation Steps: Redshift draws each vertex path as straight segments, and deformation blur allows 2, 3, 5, 9 or 17 steps, while camera and transformation blur allow up to 31 (Maxon).

2. How to export an Alembic cache for motion blur

In Maya’s Alembic export, Frame relative sample sets samples per frame; Autodesk describes it as sub-sampling data that rendering applications can read as shutter opening and closing values for motion blur (Autodesk: Alembic Export). The same options set the cache time range, world space, visibility and the file format, where HDF5 is kept for backwards compatibility (Autodesk: Alembic Export Options). The command below exports one character with samples a quarter frame before and after each frame:

iRender
Alembic export with sub-frame samples
MEL
1// Export a character cache with sub-frame samples for motion blur
2// Select the character's top group, then run in the MEL Script Editor
3AbcExport -j "-frameRange 1001 1120 -frameRelativeSample -0.25 -frameRelativeSample 0 -frameRelativeSample 0.25 -uvWrite -worldSpace -writeVisibility -dataFormat ogawa -root |char_GRP -file C:/Projects/shot010/cache/char_v001.abc";
Replace the paths, names and frame range with your ownAutodesk Maya Alembic Export Options

Change the frame range, root group and file path to match your shot. Keep the cache inside the project folder so the path still resolves when the project is copied to another machine, and export a few frames before the shot starts if the character needs pre-roll.

3. How to set up deformation motion blur in Redshift for Maya (step by step)

Settings checklist (copy or follow line by line):

Settings checklist
Render Settings › Redshift › Motion Blur
Enabled → on
Deformation Blur → on (off by default)
Deformation Steps → 3 to start, 5 or 9 for fast arcs
Transformation Steps → lowest value that looks right
Frame Duration → 1 frame for a normal camera look
Frame Position → Center
Shutter Efficiency → 1.0 unless you want softer trails
AOVs
Motion Vector AOV → off in the beauty pass
Alembic export
Frame relative sample → -0.25 / 0 / 0.25 or wider than the shutter
Topology → same vertex count on every frame

4. Maya Alembic node or Redshift Alembic Procedural?

Importing the cache through Maya’s Alembic menu brings the mesh into the scene, where you assign materials as on any mesh. The Redshift Alembic Procedural is a Redshift Proxy with File Type set to Alembic; Maxon says it loads the file at render time, which reduces extraction and processing time compared with loading the file into the scene, and its Time override lets you retime the cache (Maxon: Alembic Procedural). For proxies exported to .rs, motion blur must be enabled at export for moving proxies to blur (Maxon: Intro to Proxies).

TroubleshootRedshift for Maya

When the character is not blurred correctly

Each row starts from what you see in the frame.

What you seeLikely causeWhat to change
Camera and props blur, the character does notDeformation Blur is off; it is disabled by defaultTurn on Deformation Blur in Motion Blur settings
No motion blur on anythingA Motion Vector AOV is enabled, which turns off Redshift motion blur in the beauty renderRemove the AOV or render vectors in a separate pass
Fast arcs blur as straight streaksDeformation Steps too low for the curveRaise to 5 or 9; check GPU memory on the heaviest frame
Character loaded as a proxy has no blurThe proxy was exported without motion blurRe-export the .rs file with motion blur enabled
Blur is grainyFast motion or long frame duration needs more samplesRaise unified sampling max samples and re-test one frame
Blur missing on a mesh whose point count changesDeformation blur has no matching vertices between samplesRe-export with constant topology or test that object alone

If frames still start slowly with the GPUs idle, the time is often spent loading and extracting geometry; our guide on low GPU usage in Redshift explains how to read that in the log.

5. SaaS or IaaS render farm for Alembic character shots?

CompareNeutral guide

Which farm type fits cached character shots

Both farm types render Alembic caches; the difference is how you check blur and cache paths before the full range.

SituationUsually a better fitWhy
Caches final, paths relative, blur already approvedSaaSUpload the project and collect frames
Blur and Deformation Steps still being tunedIaaSYou render test frames and change settings on the render machine
Large caches that must be re-exported after notesIaaSRe-export and re-render on the same server
Studio pipeline with its own submit toolsEitherPick the farm that supports your submit workflow

Rule of thumb: approve motion blur on one heavy frame first; after that, render where it suits your schedule.

Rendering an Alembic character shot on an iRender server

iRender
Works 1:1 like your own PC: we keep your setup, you just get more GPUs
IaaS render farm
Your workstationscene.mb1 GPUYour iRender serverscene.mbup to 8 GPUs=same setupWindows or Ubuntu desktopYour software, in the version you chooseYour plugins and scriptsYour licensesYour scene and render settings, unchanged1 GPUGPU power: the only difference1, 2, 4 or 8 × RTX 5090 / 4090✓ Only the GPU count changes: open your scene and render the way you do at home
Same on both machinesTip: upload the full project folder with relative paths so textures are found

An iRender server is a full Windows machine with 32 GB RTX 5090 or 24 GB RTX 4090 GPUs:

  1. Upload the scene and the cache folder to iRender Drive before you start a server; uploading is free and does not use rental time.
  2. Start a server, install your Maya version and the matching Redshift build once; they stay in your image. Setup details are in Redshift for Maya on a multi-GPU render server.
  3. Render the fastest-moving frame with motion blur and check the blur and GPU memory in the Redshift log.
  4. Render the full range, then shut down. Multi-GPU servers bill per minute; 1-GPU servers have a one-hour minimum.

Alembic motion blur checklist

Tick each item before you start the full range.

ChecklistAlembic motion blur checklist
0 / 10 done
Tip: tick each item as you set up the job; the ticks reset when the page reloads.

Frequently asked questions

1. Why does my Alembic character not blur in Redshift for Maya?

Cached characters move by vertex deformation, and Deformation Blur is disabled by default in Redshift. Turn it on in the Motion Blur settings, and check that no Motion Vector AOV is enabled, because that turns off motion blur in the beauty render.

2. What does Frame relative sample do in Maya Alembic export?

It stores more than one sample per frame. Autodesk describes it as sub-frame data that rendering applications can read as shutter opening and closing values for motion blur.

3. How many Deformation Steps should I use?

Redshift allows 2, 3, 5, 9 or 17 deformation steps. More steps follow curved motion more closely but use more memory, so raise the value only for fast arcs and check memory on the heaviest frame.

4. Does deformation motion blur use a lot of memory?

It can. Maxon notes that deformation blur tracks vertex motion and can be memory-intensive, especially on high-poly or displaced geometry. Leave it off for scenes that move only by transforms or camera.

5. Should I import the Alembic or use the Redshift Alembic Procedural?

Importing puts the mesh in the scene for normal material work. The Alembic Procedural is a Redshift Proxy with File Type set to Alembic; it loads the file at render time, which Maxon says reduces extraction and processing time, and it can retime the cache.

6. Why does an Alembic exported as a Redshift Proxy have no motion blur?

Motion blur has to be enabled in the render settings when the .rs file is exported; a proxy exported without it renders without blur. Turn motion blur on and export the proxy again.

7. Why is my motion blur noisy?

Fast motion and long frame durations need more samples. In Maxon’s example, raising unified sampling max samples from 4 to 64 produced a much cleaner result.

8. Can I render Alembic characters with Redshift on iRender?

Yes. An iRender server is a full Windows machine where you install Maya and Redshift once, upload the project with its caches to iRender Drive, and render test frames before the full range.

Render your Maya and Redshift projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. Your server image is saved between sessions, so your plugins and settings stay installed. Maya is not pre-installed: you install the Maya version your scene uses with your own Autodesk license, and it stays in your image. Prime accounts get Redshift licenses pre-activated on every server.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and connect to it:

A full Maya and Redshift session we recorded on an 8x RTX 4090 server:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Maya render farm for Redshift page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , ,

Maddie Quach

Maddie Quach, from iRender's customer support team, has written more than 100 articles for the iRender blog on Maya, Houdini, Arnold, Karma XPU and Redshift.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →