May 19, 2026 Linh Nguyen

How to Enable MatCap in Blender: Install and Render MatCaps (2026)

Executive SummaryMatCap in Blender at a glance
Blender 4.x and 5.x

A MatCap (material capture) is an image of a lit sphere that Blender uses to shade a mesh by its normals in Solid viewport mode. It ignores scene lights and materials, so forms read clearly while you sculpt or model.

  • Turn it on: Solid shading › Viewport Shading popover › Lighting › MatCap, then click the sphere to pick one
  • Custom MatCaps: Edit › Preferences › Lights › MatCaps › Install; a multilayer OpenEXR with diffuse and specular layers keeps highlights white on colored meshes
  • Render it: set the render engine to Workbench and Lighting to MatCap, or build a small node material for Cycles or EEVEE
  • On a render farm: a node material with a packed image travels inside the .blend; a MatCap installed in your Preferences does not

MatCap is one of three lighting options in Blender’s Solid viewport shading, next to Flat and Studio. It does not use your lamps, World or shader nodes: every point on the mesh takes its color from a picture of a lit sphere, chosen by the direction the surface faces. That makes it the usual choice for sculpting and modeling, where you want to read shapes quickly without setting up lighting.

This guide shows how to turn MatCap on, which MatCap suits which check, how to install your own, and the two ways to get a MatCap look into a final render.

Checked against the Blender Manual (4.4–5.0) and the Blender developer documentation, November 2026.

1. What a MatCap is and how it shades a mesh

A MatCap image is a square picture of a sphere with the material and lighting already baked in. For each pixel of your mesh, Blender takes the surface normal as seen from the view and reads the point of the sphere that faces the same way. Blender’s default MatCaps were themselves rendered in Blender from a sphere and a camera (Blender developer docs).

Because the lookup depends only on the normal and the view, there is nothing to light and nothing to set up. The lighting is fixed to the view, so when you orbit the model the highlight stays in the same place on screen and slides across the surface. That sliding highlight is what makes bumps, dents and pinched areas easy to spot.

iRender
How a MatCap colors a mesh
Schematic
MatCap image (a lit sphere)square image; only the inner circle is usedYour mesh, seen from the viewportnormal (blue arrow) picks the pixel on the sphere that faces the same wayNo lamps, World or shader nodes are evaluated: only the normal direction relative to the view decides the colorPoint normals are computed from the ellipse drawn here; sphere positions = (normal x, normal y) × sphere radiusTurn the view and the lighting turns with it, because MatCap lighting is fixed to the cameraSources: Blender developer docs (MatCaps), Blender Manual (Viewport Shading)
Surface normalMatching point on the MatCap
Normals computed from the drawn curve; colors not measured

How to read the figure. The left square is the MatCap image; only the circle inside it is used. On the right is a mesh profile with five surface points. Each blue arrow is the normal at that point, and the dashed line of the same color shows where that normal lands on the sphere: a point facing up-left takes the color of the upper-left of the sphere, a point facing straight at the top takes the top. Two points with the same normal always get the same color, wherever they are in the scene.

2. How to turn on MatCap in Blender

MatCap lives in the Viewport Shading popover of the 3D Viewport, and only in Solid mode. Material Preview and Rendered modes use EEVEE or Cycles lighting instead, so the option does not appear there.

  1. In the 3D Viewport header, click the Solid shading button, or press Z and choose Solid.
  2. Click the small arrow next to the shading buttons to open the Viewport Shading popover.
  3. Under Lighting, choose MatCap (the other options are Flat and Studio).
  4. Click the sphere preview and pick a MatCap from the list.
  5. Optional: click Flip MatCap to mirror the lighting left to right.
  6. Under Color, choose how the mesh is tinted: Material, Object, Attribute, Single, Random or Texture. Single gives one even color for pure form checks; Random gives each object its own color.
  7. Optional: under Options, turn on Cavity to darken crevices and brighten ridges, or Outline to draw the silhouette.

The setting belongs to that 3D Viewport, so you can keep MatCap in one viewport and Material Preview in another. The Workbench render engine has the same Lighting choice in Render Properties, which is how a MatCap reaches a rendered image (section 5).

iRender
Turning on MatCap: the Viewport Shading popover
Schematic
3D Viewport header12Viewport ShadingLightingFlatStudioMatCap34⇄Flip MatCap5click the sphereto pick a MatCapColorMaterialObjectAttributeSingleRandomTexture6OptionsBackface CullingX-RayShadowCavityDepth of FieldOutlineSpecular Lighting7Steps in the order of the badges1Solid shading (or Z › Solid)2open the Viewport Shading popover3Lighting › MatCap4click the sphere, pick a MatCap5optional: Flip MatCap6Color › Single for pure form7optional: Cavity, OutlineCheck: the mesh now shows the MatCap shading.No MatCap button? You are not in Solid mode.Orange outline = the control to change; badge number = step number in the textLayout reconstructed from the Blender Manual (Viewport Shading, Solid mode); Blender 4.x and 5.x
Control to changeOption turned on
Simplified mockup; not every control is shown

How to read the figure. Work from the top bar down. Badge 1 is the Solid button and badge 2 the arrow that opens the popover. Inside it, badge 3 switches Lighting to MatCap, badge 4 is the sphere you click to choose a MatCap, and badge 5 mirrors it. Badge 6 sets the Color mode; Single is highlighted because it shows form without material colors. Badge 7 marks Cavity, an optional extra. If the MatCap button is missing, check badge 1 first: the viewport is not in Solid mode.

3. Which MatCap to use for which check

Each MatCap is just a different lit sphere, so pick it by what you need to see:

  • Matte, clay-like MatCaps show volume and silhouette without distracting highlights. Use them to judge overall form and proportions.
  • Glossy or high-contrast MatCaps have a sharp highlight that slides along the surface as you orbit. Uneven subdivision, small bumps and pinched topology break that highlight, so they show up quickly.
  • MatCaps with a strong rim brighten surfaces that turn away from the view, which makes the silhouette easy to read.
  • Color modes change the tint, not the lighting. Random color separates objects in a busy scene; Texture shows the image texture of the material with MatCap lighting on top.

Switching MatCaps is instant, so it is common to swap between a matte one for form and a glossy one for surface quality while you sculpt.

4. How to install custom MatCaps

Blender ships with a set of MatCaps, and you can add your own from any square image of a lit sphere:

  1. Open Edit › Preferences › Lights.
  2. In the MatCaps section, click Install… and choose the image file.
  3. Go back to the Viewport Shading popover; the new MatCap is in the picker.

Blender saves preferences automatically when Auto-Save Preferences is on; if you turned that off, use Save Preferences from the menu at the bottom left of the Preferences window, or the MatCap will be gone next time. Installed MatCaps are stored in your user configuration folder, not in the .blend file.

A plain PNG or JPEG works. The Blender developers recommend a multilayer OpenEXR file in linear Rec.709 with two layers named diffuse and specular. Since Blender 2.81, Workbench multiplies only the diffuse layer by the mesh color and adds the specular layer on top, so a colored mesh keeps a white highlight instead of a tinted one.

iRender
One image vs two layers: how MatCap color is mixed
Schematic
Two-layer MatCap (multilayer OpenEXR): shaded = diffuse × base color + speculardiffuse layer×base color+specular layer=white highlight stays whiteSingle image MatCap: the whole image is multiplied by the base colorone image, highlight baked in×base color=highlight tinted redOnly the diffuse layer takesMaterial, Object, Random orTexture color. Layer namesmust be diffuse and specular.Added in Blender 2.81Why it mattersa single image tints itshighlight too, which looksmetallic on colored meshesFormula from the Blender commit: shaded_color = diffuse_light × base_color + specular_lightSources: Blender commit 6670019 (Workbench: Specular Highlighting for MatCaps), Blender 2.81 release notes, Blender developer docs (MatCaps)
Two-layer resultSingle-image result
Spheres drawn with gradients to show the formula

How to read the figure. The top row is a two-layer MatCap. The grey diffuse sphere is multiplied by the red base color, and the specular layer, a white highlight on black, is added afterwards, so the result is a red sphere with a white highlight. The bottom row uses a single image: the highlight is part of the image, so it is multiplied by red as well and turns red. That tinted highlight is what Blender’s commit describes as looking too metallic. If your custom MatCap looks metallic on colored meshes, split it into diffuse and specular layers.

5. Can you render with a MatCap in Blender?

Yes, in two ways. The viewport MatCap itself never changes a Cycles or EEVEE render, but you can render it with Workbench or rebuild the look as a material.

Render with the Workbench engine

Workbench is the engine behind Solid mode. In Render Properties, set Render Engine to Workbench, open Lighting and choose MatCap, then pick the MatCap and Color mode the same way as in the viewport. Press F12 to render. This is the quickest way to get a clay turntable or a sculpting reel.

Build a MatCap material for Cycles or EEVEE

When the MatCap look has to sit in a Cycles or EEVEE render, for example on one object in a stylised scene, build it as a material. Open the Shader Editor on a new material and add these nodes:

  1. Geometry node: use its Normal output, the normal in world space.
  2. Vector Transform: Type Normal, Convert From World, To Camera. The normal is now relative to the camera.
  3. Vector Math set to Multiply Add, with Multiplier 0.5 and Addend 0.5 on all three axes. This moves the −1 to 1 range of the normal into the 0 to 1 range of an image.
  4. Image Texture with your MatCap image, Extension set to Extend. Connect the Vector Math result to its Vector input.
  5. Emission with Strength 1.0, fed by the image Color, so scene lights do not change the look.
  6. Connect Emission to the Surface input of the Material Output and render.
iRender
MatCap material for Cycles and EEVEE: the node graph
Schematic
GeometryPositionNormalTangent1Vector TransformVectorType: NormalFrom: WorldTo: CameraVector2Vector MathVectorMultiply AddVector0.5 0.5 0.50.5 0.5 0.53Image TextureColormatcap.pngLinear · FlatExtendVector4EmissionEmissionColorStrength 1.05Material OutputSurfaceVolumeDisplacement61Geometry › Normal is the world-space normal2turn it into camera space (x right, y up)3× 0.5 + 0.5 moves −1…1 into the 0…1 image range4the MatCap image; Extend avoids edge seams5Emission shows the image without scene lights6plug into Surface; render with Cycles or EEVEEOrange outline = value to set; badge = step number in the text. Only the X and Y of the vector reach the imageLayout reconstructed from the Blender Manual node pages (Geometry, Vector Transform, Vector Math, Image Texture, Emission); simplified
Vector wireColor wireShader wire
Simplified; helper nodes left out

How to read the figure. Follow the badges from left to right. Badge 1 is the Geometry node; wire its Normal output, not Position. Badges 2 and 3 are the two settings people get wrong: Vector Transform must be Normal and World to Camera, and Vector Math must be Multiply Add with 0.5 in both value rows. Badge 4 is the image; only the X and Y of the vector reach it. Badges 5 and 6 send the color out through an Emission shader. If the sphere appears stretched or off-center, recheck badge 3; if lights still change the result, the image is going into a lit shader instead of Emission.

MatCap checklist

Tick each item before you hand the file on or render the sequence.

ChecklistMatCap checklist
0 / 6 done
Tip: tick each item as you set up the job; the ticks reset when the page reloads.

SaaS or IaaS render farm for a MatCap or clay look?

What renders the same on any farm is what the .blend carries: the Workbench lighting setting, a node material, and an image packed into the file. What does not travel is anything installed on your own PC, and custom MatCaps are installed in your user Preferences, not in the scene.

CompareNeutral guide

Rendering a MatCap look on a farm

How the two farm models fit each way of rendering a MatCap.

Your situationSaaS render farmIaaS render farm (iRender)
Cycles or EEVEE frames with a MatCap node material and the image packedA good fit: the look is inside the .blend, so upload and render the rangeWorks as well: open the file on the server and render
Workbench turntable with a built-in MatCapCheck whether the farm renders the Workbench engineInstall your Blender version once and render as you do at home
Workbench render with a custom MatCap from your PreferencesThe farm’s Blender does not have your MatCap; convert the look to a node material firstInstall the MatCap in Preferences on the server once; it stays in your server image
Rule of thumb: if the look is packed into the .blend, any farm that runs your Blender version will render it; if it depends on files installed on your own PC, you need a machine where you can install them.

A test-render workflow on an iRender server

iRender
Works 1:1 like your own PC: we keep your setup, you just get more GPUs
IaaS render farm
Your workstationscene.c4d · .blend · .hip1 GPUYour iRender serverscene.c4d · .blend · .hipup to 8 GPUs=same setupWindows or Ubuntu desktopYour software, in the version you chooseYour plugins and scriptsYour licensesYour scene and render settings, unchanged1 GPUGPU power: the only difference1, 2, 4 or 8 × RTX 5090 / 4090✓ Only the GPU count changes: open your scene and render the way you do at home
Same on both machinesTip: upload the full project folder with relative paths so textures are found

How to read the figure. The left box is your own workstation and the right box is the iRender server: the same desktop, Blender version, add-ons and Preferences, including the custom MatCaps you install there. The only difference is the GPU count, from 1 to 8 RTX 5090 or RTX 4090, so a MatCap turntable or a Cycles sequence renders the way it did at home.

  1. Upload first. Put the .blend and any MatCap images in iRender Drive before you start a server; transfer and storage are free, and no rental time runs while you upload.
  2. Pick the server. EEVEE and Workbench draw with one GPU, so a 1-GPU server (3S or 3i) fits a turntable; split long ranges across several 1-GPU servers if needed. Cycles uses every GPU, so 2x, 4x or 8x servers suit heavy Cycles frames. 1-GPU servers have a one-hour minimum; multi-GPU servers bill per minute.
  3. Install Blender. Blender is not pre-installed: download your version from blender.org (the portable .zip runs without installing), then install your custom MatCaps in Preferences. Your server image keeps them for the next session.
  4. Render one frame. Check the MatCap, Color mode and output format before the batch.
  5. Render the range and download the frames, then shut the server down so billing stops.

Frequently asked questions

1. What is a MatCap in Blender?

A MatCap (material capture) is an image of a lit sphere. In Solid viewport mode Blender colors each point of a mesh with the part of that sphere that faces the same way, so you see form without lights or materials.

2. How do I turn on MatCap in Blender?

Switch the 3D Viewport to Solid shading, open the Viewport Shading popover with the arrow next to the shading buttons, set Lighting to MatCap and click the sphere to pick one.

3. Why can’t I find the MatCap option?

MatCap only appears when the viewport is in Solid shading. In Material Preview and Rendered modes the Lighting choices belong to EEVEE or Cycles, so the MatCap button is not shown.

4. How do I install custom MatCaps in Blender?

Open Edit › Preferences › Lights, click Install… in the MatCaps section and choose the image. Save Preferences if auto-save is off. A multilayer OpenEXR with diffuse and specular layers keeps highlights white on colored meshes.

5. Can I render with a MatCap in Blender?

Yes. Set the render engine to Workbench and choose MatCap under Lighting in Render Properties, then render. A MatCap selected in the viewport does not affect Cycles or EEVEE renders.

6. How do I make a MatCap shader for Cycles or EEVEE?

Take the Normal of a Geometry node, convert it with a Vector Transform node (Normal, World to Camera), scale it with Vector Math Multiply Add 0.5 and 0.5, feed it to an Image Texture with the MatCap image, and output the color through an Emission shader.

7. Where can I download MatCaps for Blender?

Blender already includes a set of MatCaps. Any square image of a lit sphere also works, so you can use packs shared by other artists if their license allows it, or render your own sphere in Blender as the Blender developers did for the defaults.

Render your Blender projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. You install Blender once; your server image is saved between sessions, so Blender and your add-ons stay installed.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Blender on it:

Two Blender runs we recorded on our servers: 120 frames at 1080p on 4x RTX 5090 at 72 seconds per frame, and the same 4K scene on 4x RTX 5090 and 4x RTX 4090 at 87 and 108 seconds per frame per GPU:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Blender render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , ,

Linh Nguyen

Linh Nguyen works in customer support at iRender, helping artists render Blender and Houdini projects on multi-GPU servers. She has written more than 300 articles for the iRender blog, covering Blender, Houdini and practical GPU rendering.
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →