July 16, 2025 Jun Do

How to Use Background and Reference Images in Blender

Executive SummaryReference images in Blender at a glance
Blender 4.x and 5.x

Blender has three ways to put an image in the viewport: image empties (Reference and Background), camera background images, and image planes. Only image planes render; the other two are guides for modeling.

  • Add one: switch to Front or Right view, then Add (Shift+A) › Image › Reference or Background
  • Adjust it: Object Data properties: Depth, Side, Show In, Opacity, Offset
  • Keep it out of the way: put the images in a collection and turn off Selectable in the Outliner
  • Need it in the render?: use Add › Image › Mesh Plane, an Environment Texture in the World, or the compositor

Modeling from a blueprint, a product photo or a character sheet is far easier when the picture sits in the viewport next to the model. Blender offers several ways to do that, and they behave differently: some follow the view you added them in, some only show through the camera, and only one kind appears in the final render.

This guide explains the options, sets up a front-and-side blueprint step by step, and shows how to get an image into the render when you need it there.

Checked against the Blender Manual (4.4–5.0), November 2026.

1. Reference, Background, camera image or image plane?

  • Reference image (Add › Image › Reference): an image empty, an object that shows a picture but has no geometry. It is placed facing the current view and sorts with the scene like any object, so the model can hide it and it can hide the model.
  • Background image (Add › Image › Background): the same kind of image empty, set to draw behind the scene so the model always stays visible in front of it.
  • Camera background image (Camera properties › Background Images): attached to a camera and shown only when you look through that camera. Useful for matching a model to a photo.
  • Image as a mesh plane (Add › Image › Mesh Plane): a real plane with the image as its material. This is the only one of the four that renders.

Image empties and camera background images are viewport guides: they never appear in a render.

iRender
How the Depth setting of an image empty changes what you see
Schematic
A sphere whose center sits a little behind a reference image, seen from the front with each Depth settingDepth: Defaultreference imagesorted with the geometryonly the part in front of the image showsDepth: Frontreference imageimage drawn over everythinggood for tracing outlinesDepth: Backreference imageimage drawn behind everythingacts like a backdropWith Default, the image hides whatever is behind it: here only the cap of the sphere in front of the image is drawn (dashed: full outline)Add › Image › Background creates an image empty drawn behind the scene; Reference keeps Default depthSource: Blender Manual, Empties (Image empty: Depth, Side, Show In, Opacity)
Depth settingModel
Schematic, not to scale

How to read the figure. All three panels show the same sphere, with its center a little behind a reference image, seen from the front. With Depth Default the image behaves like any object: it hides what is behind it, so only the cap of the sphere in front of it is drawn. With Front the image covers the whole model, which helps when you trace an outline. With Back the image becomes a backdrop and the whole model is drawn over it. If your reference seems to swallow part of the model, check this setting first.

2. Set up a blueprint, step by step

  1. Pick the view. Press Numpad 1 for Front (or Numpad 3 for Right). Image empties are added facing the current view.
  2. Add the image. Press Shift+A › Image › Reference or Background and choose the file. Press F2 to give it a clear name such as ref_front.
  3. Depth. In Object Data properties, set Depth: Default sorts with the model, Front draws over it, Back draws behind it.
  4. Side. Choose which side of the image is visible: Both, Front or Back. Front avoids seeing the mirrored image from behind.
  5. Show In. Tick Orthographic, Perspective, or both. Only Axis Aligned shows the image only when the view looks straight along its axis, so the front image disappears when you orbit.
  6. Opacity. Enable Opacity and lower it, around 0.5, so you can see the mesh through the image.
  7. Lock it. Move the images into a collection and turn off its Selectable toggle in the Outliner (enable the toggle in the Outliner’s Filter menu if it is hidden), so clicks go to the model.

Repeat steps 1 to 6 in Right view for the side image. Offset X/Y moves the image relative to its origin; the default of −0.5 centers it.

iRender
Setting up a reference image: the controls in order
Schematic
3D Viewport › Add (Shift A) › Imagefirst: Numpad 1 (Front) or 3 (Right)1ReferenceBackground2Mesh PlaneMesh Plane makes a real plane that rendersProperties › Object Data (image empty)Offset X / Y-0.5-0.5= centered on the originDepthDefaultFrontBack3SideBothFrontBack4Show InOrthographicPerspectiveOnly Axis Aligned5Opacity0.5006Image empties never appear in rendersOutliner › collectionReferences↖7Typical blueprint setup: Front and Right images, Depth Back, Side Front, Orthographic only, opacity about 0.5, collection not selectableOrange outline = the setting to change; badge = step number in the textLayout reconstructed from the Blender Manual (Empties, Outliner); Blender 4.x and 5.x; simplified
Setting to changeOption on
Simplified mockup

How to read the figure. The left panel is where the image comes from: badge 1 is the view you must set first, badge 2 the Add menu entries. The large panel holds the settings of the selected image empty, in the order of the steps: Depth (3), Side (4), Show In (5) and Opacity (6). Badge 7 is the Outliner toggle that stops the images being selected by accident. The note at the bottom is a common combination for a front and side blueprint.

3. Match a model to a photo with a camera background image

When you need the model to line up with a photo, attach the photo to the camera instead of using an empty:

  1. Select the camera and open Object Data properties (the camera icon).
  2. Tick Background Images, click Add Image and open the photo.
  3. Set Opacity, and choose Depth Back or Front.
  4. Press Numpad 0 to look through the camera. The image only shows in camera view.

Match the camera’s focal length and sensor to the photo where you know them; the image then becomes a guide for placing the model.

4. How to render a background image in Blender

Because reference and camera background images do not render, pick one of these when the picture has to be in the final image:

  • Mesh Plane (Add › Image › Mesh Plane, formerly the Import Images as Planes add-on): a plane with the image as a material. Place it behind the subject; it receives light and shadows like any object unless you use an emission setup.
  • World background: in the World shader, connect an Environment Texture node to the Background. Best for HDRIs and 360° images; a flat photo will look stretched.
  • Compositor: render the subject with Film › Transparent on, then lay it over the photo in the compositor. The photo is not lit by the scene, which keeps it exactly as shot.

Reference image checklist

Tick each item before you start modeling.

ChecklistReference image checklist
0 / 7 done
Tip: tick each item as you set up the job; the ticks reset when the page reloads.

SaaS or IaaS render farm for scenes with reference images?

Reference images are guides and do not render, so they only matter on a farm if they make the file heavy or point to missing files. A Mesh Plane or World image is part of the render and must travel with the .blend: pack it with File › External Data › Pack Resources, or keep the image next to the file with relative paths.

CompareNeutral guide

Background images on a render farm

How the two farm models fit a scene whose render includes an image.

Your situationSaaS render farmIaaS render farm (iRender)
Images packed into the .blend, a test frame looks rightA good fit: upload and render the rangeWorks as well: open the file and render
Images linked from folders on your PCPack them or collect them with the scene before uploadingUpload the folders to iRender Drive and keep the same relative paths
You want to check the composite on the render machineYou see it when the frames come backRender a frame on the server and adjust in Blender there
Rule of thumb: pack what renders; leave modeling references out of the upload if they are large and not needed.

A test-frame workflow on an iRender server

iRender
How iRender works: your computer controls your own multi-GPU server
IaaS render farm
Your PC or MacNo powerful GPU neededRemote desktopLive screen1:1 like your PCYOUR OWN GPU SERVERbare-metal · not sharedGPUGPUGPUGPUGPUGPUGPUGPU1, 2, 4 or 8 × RTX 5090 (32 GB) or RTX 4090 (24 GB)Threadripper PRO · 256 GB ECC RAM · 2 TB NVMe SSDFull admin access · your setup is saved between sessions1Register, top upFirst $50+ top-up doubled2Upload your projectiRender Drive, free3Start and connectRemote desktop, any OS4Render, shut downBilling stops, per minute✓ Your workstation, just more GPUs: no queue to wait, no farm plugin, no job submission, no settings changed
Your mouse and keyboardServer screen streamed back
Schematic, not to scale

How to read the figure. The top row is the setup: your own PC or Mac connects by remote desktop to a whole bare-metal server with 1, 2, 4 or 8 GPUs, so you can open the .blend and check that every image is found, exactly as at home. The numbered row is the order of a session: register and top up, upload to iRender Drive before the server runs, start and connect, render a test frame and the job, then shut down so billing stops.

  1. Upload first. Put the project and its image folders in iRender Drive before you start a server; transfer and storage are free and no rental time runs while you upload.
  2. Start a server with 1, 2, 4 or 8 RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs. Multi-GPU servers bill per minute; 1-GPU servers have a one-hour minimum.
  3. Install Blender. Blender is not pre-installed: download your version from blender.org (the portable .zip runs without installing). It stays in your server image.
  4. Check images. Use File › External Data › Report Missing Files, then render one frame.
  5. Render the range, download the frames and shut the server down so billing stops.

Frequently asked questions

1. What is the difference between a reference and a background image in Blender?

Both are image empties. A Reference image sorts with the scene, so the model can hide it and it can hide the model. A Background image is drawn behind the scene, so the model always stays in front.

2. How do I add a reference image in Blender?

Switch to the view you want, such as Front with Numpad 1, then press Shift+A › Image › Reference and choose the file. The image is placed facing that view.

3. Why is my reference image not showing in Blender?

Check Show In: if only Orthographic is ticked it disappears in perspective, and Only Axis Aligned hides it when you orbit. Also check Side and Depth, and that the object is not hidden in the Outliner.

4. Do reference images render in Blender?

No. Image empties and camera background images are viewport guides only. To render an image, use Add › Image › Mesh Plane, an Environment Texture in the World, or the compositor.

5. How do I make a reference image transparent?

Select the image empty, open Object Data properties, enable Opacity and lower the value, for example to 0.5.

6. How do I stop selecting the reference image by accident?

Put the images in their own collection and turn off the Selectable toggle for that collection in the Outliner. Enable the toggle in the Outliner Filter menu if it is not shown.

7. How do I show an image only in camera view?

Select the camera, open its Object Data properties, tick Background Images and add the image. It appears only when you look through that camera with Numpad 0.

Render your Blender projects on iRender

iRender is an IaaS GPU render farm: you rent a bare-metal server with 1, 2, 4 or 8 NVIDIA RTX 4090 (24 GB) or RTX 5090 (32 GB) GPUs, an AMD Ryzen™ Threadripper™ PRO CPU, 256 GB ECC RAM and a 2 TB NVMe SSD, connect by remote desktop and work on it like your own workstation, with full administrator access. You install Blender once; your server image is saved between sessions, so Blender and your add-ons stay installed.

Multi-GPU servers are billed per minute (1-GPU servers have a one-hour minimum), and sessions of 3 hours or more get 10% off. Our 4-GPU and 8-GPU servers are liquid-cooled; in our own measurements the GPUs hold 60–70°C under sustained render load. Elite support is available 7 days a week by hotline, live chat, Skype, WhatsApp and email.

This quick start shows how to start a server and render Blender on it:

Two Blender runs we recorded on our servers: 120 frames at 1080p on 4x RTX 5090 at 72 seconds per frame, and the same 4K scene on 4x RTX 5090 and 4x RTX 4090 at 87 and 108 seconds per frame per GPU:

New users get a 100% bonus on the first top-up (minimum $50). See plans on the Blender render farm page or download the iRender GPU app.

Accelerate your production pipeline with high-performance IaaS render farm services and dedicated bare-metal workstations powered by up to 8x NVIDIA GeForce RTX 5090 (32GB GDDR7), high-frequency AMD Ryzen™ Threadripper™ PRO processors, 256GB ECC RAM, and dedicated 2TB NVMe SSD storage tailored for your pipeline:
, , , , , , , , , , , , , , , , , , , , , ,

Jun Do

Learn something new everyday with iRender
Contact

iRENDER GPU

Render Farm Pricing
Quick Start
Multi-GPU Benchmarks
iRender GPU App
Blog
Documentation
The Render Farm
The Company
Terms & Conditions

INTEGRATIONS

Autodesk Maya
Blender
Cinema 4D
Houdini
Karma XPU
Lumion
KeyShot
Unreal Engine
Twinmotion
Redshift
Octane
And many more…

iRENDER TEAM

Elite support 7 days a week
SATURDAY – SUNDAY: 6:00 AM – 11:59 PM
(UTC+7)
Hotline: (+84) 912-785-500
Skype: iRender Support
Email: [email protected]
Address 1: 68 Circular Road #02-01, 049422, Singapore.
Address 2: No.22 Thanh Cong Street, Hanoi, Vietnam.

Contact
이 페이지는 한국어로도 제공됩니다. 한국어로 보기 →